PMF: a "spur" for better adhesion

Finishes, paints and coatings

PMF: a "spur" for better adhesion

Postby gene so » Sat Mar 10, 2018 11:36 am

Hello, I am thankful for this website as I continue to build my off road camper trailer. I am covering the plywood with PMF and prior to the application of the drop cloth, I roughed up the surface with coarse sandpaper and used this trick for petter penetration of the glue that bonds the drop cloth to the plywood.
if you go down to a Tandy leather store you can obtain a "spur", the coarser the better. This handy tool is used for marking in leather for consistent stitches. It works great for penetrating the plywood's' outer layer so your glue adheres to a greater depth. It takes a little while to make a complex pattern ina sheet of plywood with this single "rowel" tool, but increases the surface area significantly for better adhesion. This site has been so helpful to me, I feel this simple, cheap tool can be of benefit to those who frequent TNTT forums.

Gene S.
gene so
Teardrop Advisor
 
Posts: 78
Joined: Sun Aug 21, 2011 9:47 pm
Location: las vegas, new mexico

Re: PMF: a "spur" for better adhesion

Postby pchast » Sat Mar 10, 2018 9:21 pm

In a larger area a wallpaper tool might be more efficient.:thinking:
pchast
Platinum Donating Member
 
Posts: 1433
Images: 96
Joined: Mon Jan 28, 2013 5:47 pm
Location: Athens, NY


Return to Skinning secrets

Who is online

Users browsing this forum: No registered users and 1 guest