Page 1 of 1

PMF seam along wooden door frame

PostPosted: Sat May 26, 2018 4:54 pm
by Joe4Camping
I am building a foamie, and plan on gluing in a wood frame for the door opening. My question has to do with applying PMF along the seam where wood is glued to foam.

Is the consensus to :

1) wrap both the outer wall and the wood frame with PMF
2) wrap just the foam body with PMF, then glue the wood frame to the foam/canvas

or

3) apply the PMF along the face of the outer foamie wall and the outer edge of the wood frame, and cut the PMF away from the door opening

Just curious about folks' experiences....

Re: PMF seam along wooden door frame

PostPosted: Sat May 26, 2018 7:18 pm
by tac422
Here's what I did....
I canvased the walls, and then cut the openings with enough extra to fold over.
122153
122152

I did the same where there was wood, just canvased over it.
115105

Re: PMF seam along wooden door frame

PostPosted: Wed May 30, 2018 8:22 am
by Joe4Camping
Thanks, sounds good!