Teardrop #4 CNC Files

This includes traditional teardrop shapes and styles

Teardrop #4 CNC Files

Postby tony.latham » Mon Sep 07, 2020 12:36 pm

This cabin is about 125" long but fits on a 10' chasis.

Image

I've developed the CNC files for the internal skeleton, the roof blocking, external skin, and hatch ends. All of the parts are made so they can be cut from 4' x 8' plywood. Both the DXF and SVG formats are available at my webpage at https://www.tonylatham.net/teardrop-cnc-files.html

Image

The DXF files and cutting instructions are attached. Since we're limited to three attachemts, and there are ten files, I'll continue with additional posts.

And for the record: All files are for personal use only. No resale. Copyright © September 2020 Tony H. Latham :thumbdown: (I don't want these showing up on Etsy for $12.)

Tony
Attachments
Skeleton Rear DXF.dxf
(10.31 KiB) Downloaded 15 times
Skeleton Front DXF.dxf
(6.9 KiB) Downloaded 17 times
CNC Teardrop.pdf
Cutting Instructions
(93.28 KiB) Downloaded 12 times
Last edited by tony.latham on Tue Sep 08, 2020 8:54 am, edited 1 time in total.
User avatar
tony.latham
Gold Donating Member
 
Posts: 4610
Images: 17
Joined: Mon Jul 08, 2013 4:03 pm
Location: Middle of Idaho on the edge of nowhere

Re: Teardrop #4 CNC Files

Postby tony.latham » Mon Sep 07, 2020 12:39 pm

Continuing along...

Image

Tony
Attachments
Hatch End DXF.dxf
(6.66 KiB) Downloaded 15 times
Ext Skin Rear DXF.dxf
(5.58 KiB) Downloaded 14 times
Ext Skin Front DXF.dxf
(7.79 KiB) Downloaded 26 times
User avatar
tony.latham
Gold Donating Member
 
Posts: 4610
Images: 17
Joined: Mon Jul 08, 2013 4:03 pm
Location: Middle of Idaho on the edge of nowhere

Re: Teardrop #4 CNC Files

Postby tony.latham » Mon Sep 07, 2020 12:43 pm

Image

I sure wish I had a CNC when I built her.



Image

Holler if you have any questons. :thumbsup:

Tony
Attachments
roof blockng 3 DXF.dxf
(4.44 KiB) Downloaded 13 times
Roof Blockng 2 DXF.dxf
(4.87 KiB) Downloaded 14 times
Roof Blocking 1 DXF.dxf
(4.88 KiB) Downloaded 13 times
User avatar
tony.latham
Gold Donating Member
 
Posts: 4610
Images: 17
Joined: Mon Jul 08, 2013 4:03 pm
Location: Middle of Idaho on the edge of nowhere
Top

Re: Teardrop #4 CNC Files

Postby tony.latham » Mon Sep 07, 2020 12:48 pm

I almost forgot the galley lip.

Image

Image

Happy camping, happy building, :beer:

Tony
Attachments
Galley Lip DXF.dxf
(6.06 KiB) Downloaded 15 times
User avatar
tony.latham
Gold Donating Member
 
Posts: 4610
Images: 17
Joined: Mon Jul 08, 2013 4:03 pm
Location: Middle of Idaho on the edge of nowhere
Top


Return to Traditional Designs

Who is online

Users browsing this forum: No registered users and 1 guest