aggie79 wrote:I don't know what the capabilities of your CNC is, but if it can handle 4' x 10' sheet goods (or whatever size profile you're using), I'd be tempted to use 3/4" plywood "framing" instead of stick framing.
I did it the manual way with a template, jig saw and router. Here is a picture of my framing with the interior wood applied:
(By the way, I left about 3" minimum width of plywood for framing. Half that width would still be plenty strong enough.)
Cut the framing, apply the skin, and you're done.
Users browsing this forum: No registered users and 2 guests