Page 1 of 1

Serro Scotty Sportsman Junior Profile

PostPosted: Tue Sep 27, 2016 9:54 am
by powelly78
Hi,

I am looking to build a Serro Scotty Sportsman Junior replica, and cant find any info on the side profile of the trailer. I really like the shape.

Frank Bear produced a similar one, listed on his website as "Old School". http://teardroptrailerparts.com/Replica_Scotty_JR.php I contacted Frank but have not heard back from him yet.


Does anyone have a tracing of the profile or a measurement if the angles and curves?

I don't live in the USA so its near impossible for me to see one in person to measure. I've been on the national Scotty website, there is some great pictures but no measurements.

Image

http://nationalserroscotty.org/rebuilds ... index.html

Any information appreciated thanks,

Craig.

Re: Serro Scotty Sportsman Junior Profile

PostPosted: Tue Sep 27, 2016 12:32 pm
by RPH
8' Serro Scotty Profile.dxf
(232.87 KiB) Downloaded 737 times
8' Serro Scotty Profile.dxf
(232.87 KiB) Downloaded 737 times
I don't recall where I got it. I may have traced it from photos. But I have attached .dxf files for both an eight foot and ten foot version. Hope this helps. I also may have a little more specs because I was thinking of doing a complete design of this trailer.

Re: Serro Scotty Sportsman Junior Profile

PostPosted: Tue Sep 27, 2016 12:54 pm
by RPH
You might also look at the "design resources", "design library" on the home page of this web site for the Scotty 12 design.

Re: Serro Scotty Sportsman Junior Profile

PostPosted: Tue Sep 27, 2016 6:24 pm
by powelly78
Wow!

Thanks so much for this file!

It's perfect, and has all the measurements. :D

Craig.