Little Talbot State Park, Florida chapter Gathering

[Cary Winch]

Darn it all, looking at those pictures of the gathering and then looking out my window at all the ice and snow is pretty depressing. I am glad to see everyone had fun and I even saw some familiar faces in the pictures. It does my heart good too see smiles on the faces of Tom, Jake and Dani (did Jeff make it into any of the pictures Tom?) knowing that we had a hand in it.

Hey Woody, We certainly would sell you a set of fenders. Be warned though, they are pricey.

Cary

[Jiminsav]

Cary, if you tell Woody that they are boat fenders, he'll cough up the dough

[clydedavis]

Hi everybody,
I hope somone has pictures on the net we can see. Anyone?
Pammy Davis
[email protected]

PS Surgery went fine today, missed ya'll. Thinking of planning a gathering in Pleasant Garden NC (near Greensboro) at Hagan-Stone Park either 1st or 2nd weekend of July. What does everyone think?

PPS Clyde has a 1992 13 foot Casita for sale.

[Woody]

Jim,

That's funny Boat fenders Hmmmm are they? How much are they anyway for future reference, because I have priced "boat fenders" and they aren't that pretty.

Jim you got some room to talk about having fenders Maybe Cary will sell them to us for group discount? Shhh! Don't let Cary see this I wrote this in a code that only you and I can see Shhhh!

[ALAN GEDDES]

Clyde and Pammy check the other thread for pictures. Come join us at Lake Wateree on 2 -4 April. It's close. Good news on the surgery. Chip Frank Me my daughter and Ross are already in for it. July Sounds good to me . Set it up.

[Ross Wade]

Glad to hear everything went smooth, Pammy. Like Alan said, SET IT UP. We would love to go

Ross

[Cary Winch]

Woody,

Ok then.

Are you really sure?

Drum roll please -------


$539.00 per pair.



Are you Ok? If did warn you.

Cary

[Woody]

Cary,
Wow, I really like the shape though, maybe a pattern is in order. I could make the out of wood to match my Woody. I could handle that How would one get the pattern of the shape. I knew I should have traced one at the gathering, Darn it. The overall side shape and the measurement of the width. It was so easy, but, I let Pickle juice have it's way with me and didin't do it

[Frank]

Cary,

WOW Knew I had good taste! Always been told I have a champange taste and a beer wallet. Believe I'll just take the template. Do you take paypal?

Frank

[BobR]

Darn it all, looking at those pictures of the gathering and then looking out my window at all the ice and snow is pretty depressing. I am glad to see everyone had fun and I even saw some familiar faces in the pictures. It does my heart good too see smiles on the faces of Tom, Jake and Dani (did Jeff make it into any of the pictures Tom?) knowing that we had a hand in it.

Hey Woody, We certainly would sell you a set of fenders. Be warned though, they are pricey.

Cary

Cary,

First of all I want to say I was really impressed with the quality of the Camp Inns...If anyone asks me where to buy a new teardrop you will be the only choice..

I do have a question about the way the roof aluminum is seamed. Whats the price for a trade secret? I would like to know who much you overlapped the panels and how you sealed them to make sure they didn't leak. If I build another I will be doing a wide body and I know that 5-6' wide AL is expensive.

Thanks.

[Cary Winch]

Woody and Frank,

I suppose we could do a pattern for you guys. I think I told Jim on the other thread $10.00 to trace it out. Then figure in postage. Sorry though we aren't doing Paypal yet, it will have to be a check.

Let me know if that is something you really want to do.

Bob,

No big trade secret on the roof seam. Same thing we use along the edges too. Urethane adhesive. The stuff in the tubes used to set in car windsheilds. Most auto parts stores carry it. You can use the Butyl too but it is more of a pain to work with. You don't need much of a overlap but plenty of screws though (long ones, 1" or better) to get it reasonably flat. You do want enough overlap so to keep the stuff from squirting out by keeping the bead back from the edge. Make sure the bead is where the screw holes are so the screws pass through it, hate to have leaky screws. The biggest waring I have about the urethane is to be very carefull of getting it on you or anything else you don't want it on forever. I swear the stuff multipies. We call it the evil black stuff in the shop. Cleanup of it is laquer thinner.

Cary

[Woody]

Cary,
I want the pattern, Let me know what it will cost and how you want me to pay for it.

[Jiminsav]

Woody said he's buy me one too..

[Woody]

Jim,
you want the pattern?

[Frank]

Me too, what are you guys going to use for materal? Hoping I can aquiar some stainless.