Fender Help

[rmcelroy]

Hi guys n gals

Over on the General Discussion board in a 47 Kit thread I asked about fender info.

I was wanting to check here, to see if anybody is running the FENO fenders on this page.
http://www.teardroptrailers.net/parts/fender/fender.htm

If so I would greatly appreciate a pic of one with a yardstick in the shot. I would really like to use this fender but am afraid I'm going to face clearance problems with the door. I could print the pic out and use the scale to measure for problems

From what I've read they will be OK width wise.

Thanks for your help

mc

[madjack]

Mc, we used those fenders on our first camper and while I have no pics with a reference, it seems like they were 40"s long...
madjack

[rmcelroy]

Thanks MJ

I'll tape one of those down to a drafting board and figure it all out.

[rmcelroy]

Ok, after measuring the pic it looks like I'm going to be able to use these fenders. I do need to replace my tires to do so, from the pic it looks like these wheel have a 18 inch diameter (my tires are 22 inch). That reduction will assist in clearing the door and I needed to replace my trailer tires with car tires to try and reduce hopping anyway.

I think these fenders will really help set off the look of my Tear.

Thanks Jack

mc

[madjack]

Mc, those tires are 205=70=15's with a diameter of 26"s..................................

[rmcelroy]

Woa, that makes me look pretty silly. I'll have to get out the old Ouji board and see what I did wrong.

I'll print the pic again (larger) and see if I can get it right this time....thanks for taking care of the tards MJ

mc