Greetings from Alberta. I am deciding on my TTT floor plan design, frame and plywood floor are ready to start interior and walls. This is my first post for the build. It is a foamie with fibreglass and thin plywood reinforcement. I do have some diy experience with fibreglass, aluminum, fabrics, wood, some welding. I have drafted the floor plan for your advice please. Any input is highly appreciated. I know this plan has its inconveniences when the queen bed is expanded, but I feel it is providing good sleeping space that way as well. There is also an opportunity to make upper side of left side bathroom wall to overlap the queen bed for more space inside the bathroom(for wash sink maybe). The trailer exterior and interior walls will be foldable down from kitchen countertop level. The Conceptual mockup is in my album at this site.
Thanks in advance for all your constructive input here.
Oleg
24-NOV-2019 EDIT: Since this initial concept model below the trailer design has changed substantially towards aerodynamically streamlined shape with lifting roof and folding side walls.