Step 5: Dryfit the walls

Here is a generic building plan for a teardrop designed by the members of T&TTT.

Postby bledsoe3 » Fri Jun 01, 2007 12:28 am

Mary K wrote: I have not done mine yet or I would show you a picture.

Here's a picture.

Last edited by bledsoe3 on Fri Jun 01, 2007 11:16 pm, edited 1 time in total.
If you do what you've always done, you'll get what you've always got.
User avatar
3000 Club
3000 Club
Posts: 3694
Images: 112
Joined: Tue Jun 07, 2005 5:55 am
Location: Oregon, Portland

Postby Mini Renegade » Fri Jun 01, 2007 4:24 pm

thanks guys, will fire up the jig saw :applause:
If evvr tha dus owt fr nowt, allus do it fr thissen
User avatar
Mini Renegade
500 Club
Posts: 520
Joined: Tue May 15, 2007 2:26 pm
Location: (Old) York

Re: Step 5: Dryfit the walls

Postby markhusbands » Tue Jul 17, 2012 10:03 am

So the exposed edge of the hatch is thick enough to achieve a decent seal and not be easily damaged? Seems like it might need some kind of edge protection.
User avatar
Teardrop Master
Posts: 285
Images: 58
Joined: Tue Jul 03, 2012 3:17 pm
Location: Denver, Colorado, USA

Re: Step 5: Dryfit the walls

Postby JeffofCT » Tue Jun 23, 2015 7:20 pm

If there is a true 1/4" overhang on both sides, any reason why one would not try to notch out the inside of the 3/4" ply by the height of the plywood floor/1/2" birch? That would permit the sides to partially rest upon the floor.

Donating Member
Posts: 16
Images: 0
Joined: Thu Jun 11, 2015 3:29 pm
Location: Connecticut


Return to Generic Building Plans

Who is online

Users browsing this forum: No registered users and 0 guests