I'm back from vacation and going to get serious about designing and building my TD. It's going to be a 5' X 10' classic design.
First step I would like to build the frame. Here is what I have so far.
I'm planning on using 2" X 2" 3/16" steel tube for the cross members and the angle members in the front. I think I'll use 2" X 2" 1/8" for the side rails and the tongue.
Here are two views I'm working on. One is obviously the trailer and the other is the frame with dimensions.
Any comments would be greatly appreciated.
Thanks,
KennyB