Greetings Fellow Campers! I am wondering if anyone here can give me some advice on a tail light/wiring issue I'm having in a 2013 LG 5'Wide. It seems there are some gremlins in the wiring and one of the tail lights still glows slightly even when the tow vehicle is turned off. I was thinking the other tail light must be burned out, but today when I tested the car's emergency flashers, it still lights up, but not when I hit the brake or turn signal. There seems to be a couple burned out LED's in this tail light though, as you can see a blackened area in the light. Is this a 7 pin issue, ground fault, short...or did some bloke wire it wrong when I had my 7 pin plug replaced?
I had tried taking the tail light out, but its so tight in the housing that I didn't think I could get it out without scratching the paint. When I look under the tailer, there is no visible opening to reach into the tail light area as its sealed up with a cloth/paper material that I have no idea how to replace if ripped. If I could get access to the tail light, without having to repair additional things, it would make this so much easier!