Hi Tim! Yes Vintage Technologies is the source for all of that. T moulding(HT13) on the door, HT09 and HT10 on the door jamb. Also used the HT10 on the roof. Also used the HT09 on the top and bottom ledges of the hatch. I will take pictures tonight of that and upload them here!TimC wrote:Nicole and Kyle... my brother is going to start on his door fitting. Can you share your source for the aluminum trim? Wall side looks like two edge mouldings and door side looks like a t moulding. What will you use for weather stripping?
And, he's wondering if you'll use the same technique on the hatch?
He's not far from Vint. Technologies. Hoping that's your source.
Thanks, Tim
We used a small D seal from Vintage Technologies on the doors, but they aren't providing enough of a seal. I'm going to buy larger D seals for the doors after our first trip. We're going to put wood veneer on the inside of the door trim possibly. Currently Kyle just went over it with spar varnish for our first trip to give it some protection. We are going to put our large tent over the camper this whole weekend so we don't have to worry about leaking. The only spots I'm worried about are the doors because of the small seals and the top of the hatch I feel we need to put some extra caulk in a couple areas.
Sent from my SM-N950U using Tapatalk