Moderator: eaglesdare
ghcoe wrote:I am playing with vinyl floor glue. Good results so far.
KCStudly wrote:... or just use thickened epoxy.
I have some epoxy on hand, tried it, somewhat melted the foam and left voids, not an option at all, maybe just wrong epoxy, I don't know, just tried what I had on hand.
QueticoBill wrote:3M 100NF contact adhesive is what I've seen used.
msaxton63 wrote:ghcoe wrote:I am playing with vinyl floor glue. Good results so far.
Interesting, I happen to have some of that on hand and never thought to try it, its fairly cheap,, mayhaps a little experimenting is in order here! Did you sand and/or perforate first? Glue both sides? If my thoughts aren't wrong I do believe that is chemical dry/cure and not air dry/cure. And, decent open working time too!
Users browsing this forum: No registered users and 8 guests