by kayakrguy » Sun Sep 24, 2006 7:05 am
Hi Folks,
I am thinking of doing the 'Inside out' way of building and would like to folow up this discussion with some questions.
First, for the hatch spars do you use the same size as the rest of the build?
I realize that the hinge and bottom spars are doubled up--just not clear if they are the same size as the rest of the spars.
Second, vertical ribs. I know I will have to trace the outline of my hatch curve on some ply to get a pattern for the vertical ribs. The question that got me symied is how do I get the correct angle for the cut that joins the vertical ribs to the hatch hinge spars? I know there should be a way to do that but my spatial visioning skills are nada, so any help you can offer would be appreciated.
Thanks everyone,
Jim
A disposition to preserve, and an ability to improve, taken together, would be my standard of a statesman...
But what is liberty without wisdom, and without virtue? It is the greatest of all possible evils; for it is folly, vice, and madness, without tuition or restraint.
Edmund Burke