Fuse panel Vs. Direct Wire

Anything electric, AC or DC

Fuse panel Vs. Direct Wire

Postby Jst83 » Tue Aug 29, 2006 10:04 pm

I'm about to start wireing my tear. I don't plan to have battery. I was wondering is there a real need for a fuse or breaker panel or can I direct wire it all to the cord to the campground electric. Hope this makes since :?
Image
User avatar
Jst83
3000 Club
3000 Club
 
Posts: 3606
Images: 215
Joined: Thu Jul 20, 2006 7:33 pm
Location: Indiana, Greenfield

Postby Dale M. » Tue Aug 29, 2006 10:17 pm

I personally think you need to have some sort of protection for your internal systems. That means a breaker panel or fuse panel with at least one breaker or fuse (or how ever many be required) between your trailer systems and shore power... IF you power needs are minimal one circuit with 15 amp breaker or fuse may be enough ..

You can never be sure what shore power you will be plugging in to and how well it is protected... It may have a amperage capacity that is high enough to cause damage in your system before "their" breaker blows...

Dale
Lives his life vicariously through his own self.

Any statement made by me are strictly my own opinion.
You are free to ignore anything I say if you do not agree.

Image
User avatar
Dale M.
2000 Club
2000 Club
 
Posts: 2693
Images: 18
Joined: Thu Jun 09, 2005 8:50 pm
Location: Just a tiny bit west of Yosemite National Park

Postby bdosborn » Tue Aug 29, 2006 10:25 pm

I get to look at all kinds of electrical systems with my work. Some of the scariest I've seen have been at campgounds. You should protect the hundreds of hours you'll have building your trailer with a circuit breaker. There's plenty of people here who will talk you through the install.
Bruce
2009 6.5'X11' TTT - Boxcar
All it takes is a speck of faith and a few kilowatts of sweat and grace.
Image
Boxcar Build
aVANger Build
User avatar
bdosborn
Donating Member
 
Posts: 5492
Images: 767
Joined: Wed May 05, 2004 11:10 pm
Location: CO, Littleton
Top

Postby asianflava » Tue Aug 29, 2006 11:29 pm

At the very least you could do a setup like Mike's. A GFCI power strip that plugs into the pole, then everything is plugged into that.
User avatar
asianflava
8000 Club
8000 Club
 
Posts: 8412
Images: 45
Joined: Mon Aug 02, 2004 5:11 am
Location: CO, Longmont
Top

Postby emiller » Wed Aug 30, 2006 6:32 am

The worst thing in the world would be to have a fire in your trailer when your asleep, always when safety is in question be safe add some sort of protection.
User avatar
emiller
Donating Member
 
Posts: 3421
Images: 157
Joined: Sun Jun 13, 2004 11:00 pm
Location: Arizona, Phoenix
Top

Postby mikeschn » Wed Aug 30, 2006 7:16 am

We added a $5 smoke detector to our Winter Warrior. 8)

Mike...
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
User avatar
mikeschn
Site Admin
 
Posts: 19202
Images: 479
Joined: Tue Apr 13, 2004 11:01 am
Location: MI
Top

Postby Jst83 » Wed Aug 30, 2006 2:21 pm

Looks like a breaker system is the way to go. Time to find a small breaker box. Thanks everyone for keeping me from takeing the short cut I new I shouldn't take. :oops:
Image
User avatar
Jst83
3000 Club
3000 Club
 
Posts: 3606
Images: 215
Joined: Thu Jul 20, 2006 7:33 pm
Location: Indiana, Greenfield
Top

Re: Fuse panel Vs. Direct Wire

Postby Steve_Cox » Wed Aug 30, 2006 7:32 pm

How about a ground fault interrupter to plug into the campground power and then a power strip or two with a pop out breaker in the TD.

Image


Jst83 wrote:I'm about to start wireing my tear. I don't plan to have battery. I was wondering is there a real need for a fuse or breaker panel or can I direct wire it all to the cord to the campground electric. Hope this makes since :?
Steve
User avatar
Steve_Cox
4000 Club
4000 Club
 
Posts: 4903
Images: 196
Joined: Sun Apr 03, 2005 8:46 am
Location: Albuquerque New Mexico
Top

Postby mikeschn » Wed Aug 30, 2006 7:38 pm

Agreed...

If you can slip a gfci in between the campground power and your trailer, you don't need a fusebox/panel...

Image

Mike...
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
User avatar
mikeschn
Site Admin
 
Posts: 19202
Images: 479
Joined: Tue Apr 13, 2004 11:01 am
Location: MI
Top

Postby TomS » Wed Aug 30, 2006 7:56 pm

mikeschn wrote:If you can slip a gfci in between the campground power and your trailer, you don't need a fusebox/panel...


Mike, posteth electrical blasphamy! You needeth both GFCI and a breaker sayeth the Lord.

GFCIs and breakers serve two completely separate functions. GFCI's keep you from being electrocuted. Breakers protect your tear from fire. I use a short GFCI 3 outlet cord in my tear. My extension cord has a built-in 15-amp breaker.

As others have stated, do not trust campground wiring. Carry your own GFCI and breaker protection.
Tom Swenson
[email protected]
User avatar
TomS
1000 Club
1000 Club
 
Posts: 1367
Joined: Thu Nov 18, 2004 2:06 pm
Location: Fitchburg, MA
Top

Postby mikeschn » Wed Aug 30, 2006 8:02 pm

Okay I stand corrected.

I stated early on I know very little about electricity... That's why we have guys like you to save our teardrops!

Mike...

Image
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
User avatar
mikeschn
Site Admin
 
Posts: 19202
Images: 479
Joined: Tue Apr 13, 2004 11:01 am
Location: MI
Top

Postby Larwyn » Wed Aug 30, 2006 8:13 pm

I used both. A breaker box and GFCI outlets, put them together in a compact package, from there it is simple outlet strips for those things with plugs............. :D :D
Image
Larwyn

Keeper of the Most Out Of Control Shop (2005)

I feel bad for the man that cannot spell a word more than one way. Mark Twain
User avatar
Larwyn
Mad Kilted Texan
 
Posts: 1658
Images: 210
Joined: Sun Jun 20, 2004 12:06 pm
Location: Kerrville, Texas
Top

Re: Fuse panel Vs. Direct Wire

Postby bdosborn » Wed Aug 30, 2006 8:37 pm

Steve_Cox wrote:How about a ground fault interrupter to plug into the campground power and then a power strip or two with a pop out breaker in the TD.

Image



Yup, that's the ticket for people who want to keep their wiring simple and sweet. Plug 'em in and you're done.
Bruce
2009 6.5'X11' TTT - Boxcar
All it takes is a speck of faith and a few kilowatts of sweat and grace.
Image
Boxcar Build
aVANger Build
User avatar
bdosborn
Donating Member
 
Posts: 5492
Images: 767
Joined: Wed May 05, 2004 11:10 pm
Location: CO, Littleton
Top

Postby Endo » Wed Aug 30, 2006 8:45 pm

You can pick up one of these at Lowes (Shock Buster). It has a built in GFCI and a 15 amp breaker.

Image
Brad (aka Endo)
ImageImage Image
In God We Trust
User avatar
Endo
500 Club
 
Posts: 721
Images: 138
Joined: Fri Apr 01, 2005 9:59 am
Location: Ohio
Top

Postby Jst83 » Thu Aug 31, 2006 5:12 am

:? Seems to be quit the difference of opinion. GFCI or Breaker. Where is the best place to pic up a small breaker. I'm going to visit the local junk yard Fri. they have a couple nice campers I've been pilfering parts off of. Gonna see what they have going to also get my water inlets for the camper.
Image
User avatar
Jst83
3000 Club
3000 Club
 
Posts: 3606
Images: 215
Joined: Thu Jul 20, 2006 7:33 pm
Location: Indiana, Greenfield
Top

Next

Return to Electrical Secrets

Who is online

Users browsing this forum: No registered users and 11 guests