Texsport Iron?

Recipes that work best for teardroppers

Texsport Iron?

Postby IndyTom » Fri Mar 16, 2007 9:04 pm

One of the local sporting goods stores (Dick's Sporting goods) is selling Texsport dutch ovens. Has anyone used one of these? What is the quality like? I already have 2 lodges, but I thought I might give one of these a try if they were any good.


Tom
Never trust a skinny cook

My build thread:http://tnttt.com/viewtopic.php?f=5&t=36226

Image
User avatar
IndyTom
500 Club
 
Posts: 876
Images: 42
Joined: Mon Jan 16, 2006 11:19 am
Location: Carmel, IN

Postby Outlaw » Sat Mar 17, 2007 12:47 am

I have a 2 quart Texsport D.O. and it seems to work just fine. I think I only paid $12.99 for it and I think it was definately a good buy. I picked the best one off the counter making sure the lid fit level on top. It's still not a Lodge, however, I think it was a value purchase.
Eric
ImageImageImage
User avatar
Outlaw
Donating Member
 
Posts: 651
Images: 25
Joined: Mon Jan 23, 2006 9:18 pm
Location: South Central, PA

Postby IndyTom » Sat Mar 17, 2007 11:16 am

Thanks Eric,

I think I am going to go by Dick's later today and take a closer look.

And HAPPY ST. PATRICK'S DAY! :thumbsup: :applause:


Tom
Never trust a skinny cook

My build thread:http://tnttt.com/viewtopic.php?f=5&t=36226

Image
User avatar
IndyTom
500 Club
 
Posts: 876
Images: 42
Joined: Mon Jan 16, 2006 11:19 am
Location: Carmel, IN
Top

Postby Outlaw » Sat Mar 17, 2007 12:33 pm

Thanks my friend! I'm getting ready to put a huuuuge pan of Shepard's Pie in the oven. Already downed a few beers . . . hic~up
Eric
ImageImageImage
User avatar
Outlaw
Donating Member
 
Posts: 651
Images: 25
Joined: Mon Jan 23, 2006 9:18 pm
Location: South Central, PA
Top

Postby IndyTom » Sat Mar 17, 2007 1:46 pm

OOOH, I love a good shepherds pie. And I think I my enjoy a few good Smithwick's myself before the day is done.


Tom
Never trust a skinny cook

My build thread:http://tnttt.com/viewtopic.php?f=5&t=36226

Image
User avatar
IndyTom
500 Club
 
Posts: 876
Images: 42
Joined: Mon Jan 16, 2006 11:19 am
Location: Carmel, IN
Top

Postby Dean in Eureka, CA » Sat Mar 17, 2007 6:05 pm

Tom,
A very close friend of mine owns a very cool store in our little podunk community. It's kinda like a sporting goods store, with of a cross of army surplus and outdoor fitters all wrapped up in one. Went in when I was first getting my feet wet in DOs. He had the TexSports. I wanted something a bit bigger and something a bit smaller than the two Lodges I already had.
I had the isle completely blocked off with TexSports ovens everywehere. He comes over and asked just what the hell I was doing??? I told him that If I could find one in each size that I wanted, that wasn't warped, I'd buy it. That kinda opened his eyes a bit, he wasn't aware about that type of quality issue. I didn't buy any dutch ovens from him that day, but he said he was gonna look into the Lodges.
I went in again last week for another pair of comfortable work shoes I buy from him and asked about the Lodges...
He thanked me for reminding him about that 'cause he was heading out that day for a trades show somewhere back East. Told me he's gonna switch to the Lodges and wants me and some friends to come do a cooking demonstration at his store when he kicks these things off.
Lodge is the only dutch oven still made in the USA, with the exception of Maca's behemoth 22" if yaa wanna count that one item... All others are either made in China or India.
TexSports ovens are reasonably priced and if you decide to get one, check for oven warpage and even wall thickness on the oven.
User avatar
Dean in Eureka, CA
The Fogcrawler
 
Posts: 4997
Images: 69
Joined: Thu May 11, 2006 8:44 pm
Top

Postby Nitetimes » Sat Mar 17, 2007 11:17 pm

Just found out Trader Horn sells Lodge stuff. I saw a 6 qt DO, a large 2 handle skillet maybe 20-22" and assorted skillets and griddles. They had a pretty good stock actually. :thumbsup: :thumbsup:
Rich


Image
ImageImage
-
The strongest reason for the people to retain the right to
keep and bear arms is, as a last resort, to protect themselves
against tyranny in government.
- Thomas Jefferson -
Personally, I carry a gun because I'm too young to die and too old to take a butt kickin'.
User avatar
Nitetimes
7000 Club
7000 Club
 
Posts: 7909
Images: 194
Joined: Sat Feb 12, 2005 12:44 am
Location: Butler,PA
Top

Postby bledsoe3 » Sat Mar 17, 2007 11:58 pm

I'm watching Celebrity Kitchen Makeover right now and they showed the Lodge plant making some C.I. They make 1400+ castings a day.
If you do what you've always done, you'll get what you've always got.
User avatar
bledsoe3
3000 Club
3000 Club
 
Posts: 3694
Images: 112
Joined: Tue Jun 07, 2005 5:55 am
Location: Oregon, Portland
Top

Postby IndyTom » Sun Mar 18, 2007 12:13 pm

Dean,

I was figuring that you would chime in here sooner or later. Thanks for the insight on the quality issue. I have the Lodge 12 and 8 and really do love them. They are incredibly well made. The only reason I was looking to something else was the fact with two young boys, a bargain is always a good thing. Back in Dec. I went right by the Lodge outlet store in east Tenn. But I didn't any cash at all that I could spend on DOs :x I may be back by there later this year and if so, I will make sure I got some cash.

After using my 12 and 8 for a while now, I see that I need a couple of 10's and at least one 14. Gander Mountain here in Indy carries Lodge CI for a pretty reasonable price if I cant get back down to Tenn.

Gander Mountain also carries a behemoth DO that I do not remember the brand name right off. Somewhere around 20" to 21" for about $70 If you sort through them, you can find some pretty good ones. I would love to have one for doing really big pizzas.

I can't believe how much fun it is cooking in my DOs. My wife is convinced that I have gone over the edge, but she always enjoys the food I cook when I get it on the table.

Thanks everyone for your input.

Tom
Never trust a skinny cook

My build thread:http://tnttt.com/viewtopic.php?f=5&t=36226

Image
User avatar
IndyTom
500 Club
 
Posts: 876
Images: 42
Joined: Mon Jan 16, 2006 11:19 am
Location: Carmel, IN
Top

Postby Dean in Eureka, CA » Sun Mar 18, 2007 12:27 pm

Yeap...
You'll wanna get both 10's, especially the 10 deep before they're all gone.
Then both 14's... Oh and don't forget that 12 deep to cover the bases on the deeps.
Then on to the 16!... Yeah!!!

But then the dreaded obsession of the ellusive 5 will bite yaa. :lol:
User avatar
Dean in Eureka, CA
The Fogcrawler
 
Posts: 4997
Images: 69
Joined: Thu May 11, 2006 8:44 pm
Top

Postby Ma3tt » Sun Mar 18, 2007 12:58 pm

Waffles.
Be Good
1967 Siesta del Sobrino "Standy"
If you lived here... you would be home by now.
http://www.Camp-Cook.com
User avatar
Ma3tt
Dutch Oven GURU
 
Posts: 1140
Images: 179
Joined: Tue Apr 19, 2005 10:19 am
Location: Noodleberry Park. Ca.
Top

Postby IndyTom » Sun Mar 18, 2007 2:07 pm

OK Matt,

That brings up an entirely different issue. I am looking for a couple CI waffle irons. I see the older ones on ebay, and there are a few modern ones. What do you suggest?


Tom
Never trust a skinny cook

My build thread:http://tnttt.com/viewtopic.php?f=5&t=36226

Image
User avatar
IndyTom
500 Club
 
Posts: 876
Images: 42
Joined: Mon Jan 16, 2006 11:19 am
Location: Carmel, IN
Top

Postby Dean in Eureka, CA » Sun Mar 18, 2007 2:17 pm

My 2 cents...
Get the older flip-flop-ball joint type with the TALL base...
Works great over a big propane burner! :thumbsup:

Don't forget to keep an eye out for spiders too, they're pretty cool.
BTW-Camp Chef recently came out with a 20'er. :o

But if you dare and really get the bug bad... Check out the Maca 22" :bowdown:
User avatar
Dean in Eureka, CA
The Fogcrawler
 
Posts: 4997
Images: 69
Joined: Thu May 11, 2006 8:44 pm
Top

Postby Kevin A » Sun Mar 18, 2007 2:52 pm

Dean in Eureka, CA wrote:
But if you dare and really get the bug bad... Check out the Maca 22" :bowdown:

Yeah, I hear you can even get married in the 22"er :o
"Follow me, I'm right behind you"

ImageImage
User avatar
Kevin A
The other guy
 
Posts: 3222
Images: 289
Joined: Mon Jan 17, 2005 1:16 am
Location: California, Eureka
Top

Postby Ma3tt » Sun Mar 18, 2007 10:20 pm

I would always go vintage if possible the cost is about the same and the seasoning is 80 years deeper.
two of my wafflerators or top center and the third is on the right.
Image

Here is how the ball joint works it is really cool errr hot.
Image
Hi boy is a wagner and the low boy is a griswold
Image

and proof they really make waffles....
Image

This one is a keen kutter very collectable not very cleanable. I don't use this one and am waiting for some Keen Kutter collector to offer me sick $$$$ for it.
Image
Be Good
1967 Siesta del Sobrino "Standy"
If you lived here... you would be home by now.
http://www.Camp-Cook.com
User avatar
Ma3tt
Dutch Oven GURU
 
Posts: 1140
Images: 179
Joined: Tue Apr 19, 2005 10:19 am
Location: Noodleberry Park. Ca.
Top

Next

Return to Recipes by and for teardroppers Cookbook #1

Who is online

Users browsing this forum: No registered users and 3 guests