homemade gasless gas struts

Anything to do with mechanical, construction etc

Postby Mary K » Sun Jun 10, 2007 6:24 pm

sushidog wrote: Thanks. I need a 36" lift though. Do you know if they work upside down?


:thinking: I don't have a clue... Sorry...anybody else???

sushidog wrote: I could attach two 18" struts together, doubling my lift.


You could indeed! :thumbsup: I have seen it done on someone elses hatch. Check out jiminsavanna's I think he has doubble struts. I could be wrong though..

Mk
Mary K

I don't know half of you half as well as I should like; and I like less than half of you half as well as you deserve. Bilbo Baggins
User avatar
Mary K
6000 Club
6000 Club
 
Posts: 6425
Images: 44
Joined: Wed Aug 02, 2006 3:07 pm
Location: Florida, Pensacola

Postby Miriam C. » Sun Jun 10, 2007 7:40 pm

Sushidog
You can put two lifts side by side. I don't think you can attach them end to end.

Trying to find some myself. Have you seen the information here:

http://tnttt.com/viewtopic.php?t=11210

Good luck.
“Forgiveness means giving up all hope for a better past.â€
User avatar
Miriam C.
our Aunti M
 
Posts: 19675
Images: 148
Joined: Wed Feb 15, 2006 3:14 pm
Location: Southwest MO

Postby madjack » Sun Jun 10, 2007 10:42 pm

sushiD...checkout the link MK sent you...you will find what you want...and yes you can(upside down that is)...... 8)
...I have come to believe that, conflict resolution, through violence, is never acceptable.....................mj
User avatar
madjack
Site Admin
 
Posts: 15128
Images: 177
Joined: Thu Dec 02, 2004 5:27 pm
Location: Central Louisiana
Top

Postby sushidog » Wed Jun 13, 2007 9:14 am

Thanks everyone! :)
User avatar
sushidog
Teardrop Advisor
 
Posts: 91
Images: 116
Joined: Thu Jun 07, 2007 7:31 pm
Location: Abita Springs, Louisiana
Top

Postby mallymal » Mon May 25, 2009 4:04 pm

Maybe a cheap source of metal rod for gasless struts.... and because it's extendable, you know it's going to be two poles which slide inside each other...

http://www.ikea.com/us/en/catalog/products/50079374

:thumbsup:
User avatar
mallymal
The 300 Club
 
Posts: 308
Images: 18
Joined: Fri Sep 26, 2008 4:20 am
Location: manchester, UK
Top

Postby Leon » Tue May 26, 2009 1:08 am

Not sure if a curtain rod will be strong enough to hold up a hatch, especially if the wind kicks up.
User avatar
Leon
Silver Donating Member
 
Posts: 559
Images: 21
Joined: Mon Oct 24, 2005 12:23 am
Location: So Cal (Ridgecrest)
Top

Postby 2bits » Wed Aug 25, 2010 1:23 am

Thanks for the cool idea Madjack!!!
Thomas

Image
User avatar
2bits
2bit Member
 
Posts: 5130
Images: 8
Joined: Thu Dec 27, 2007 6:04 pm
Location: Lake Tawakoni, TX
Top

Postby bravebluemice » Sat Sep 18, 2010 12:02 pm

Sweet idea, Jack! You know those little spring loaded buttons like in patio umbrellas would be far more convenient than the R pins. Self contained. Won't get lost. That's the direction I'll go with mine.

Cheers,
BBM
Press On Regardless.
User avatar
bravebluemice
Teardrop Builder
 
Posts: 35
Joined: Fri Sep 17, 2010 6:38 pm
Location: Cottage Grove, MN
Top

Postby BillZ » Sun Jun 26, 2011 9:46 am

mallymal wrote:Maybe a cheap source of metal rod for gasless struts.... and because it's extendable, you know it's going to be two poles which slide inside each other...

http://www.ikea.com/us/en/catalog/products/50079374

:thumbsup:


Why didn't I think of that!


I have Ikea curtain rods on my windows. I think they would be an excellent choice for gasless gas struts. The rods are very sturdy, more than you would expect from a curtain rod. I doubt they would have any trouble holding up the weight of most hatches. They also have a nice powdercoat-like finish.
User avatar
BillZ
The 300 Club
 
Posts: 308
Images: 0
Joined: Tue Feb 16, 2010 7:39 pm
Location: College Park, Maryland
Top

Postby Chef_Stan » Sun Jul 17, 2011 9:43 pm

You could also use a beat up expandable fly pole. Most campers probably have one of those hanging around, and plenty strong.
Chef_Stan
Teardrop Builder
 
Posts: 34
Joined: Sun Jun 19, 2011 8:42 pm
Location: Canterbury, CT
Top

Hatch supports

Postby seattlejack » Thu Jul 21, 2011 11:48 pm

I used the telescoping legs from a camera tri-pod. GoodWill about $5 for three legs. They worked ok, but I had to have both locked to hold the hatch weight. Swivel brackets on the top/hatch, rubber feet for the bottom [came with the tri-pod], and velcro holdup straps.
I could hold up the hatch with one hand, unzip the velcro, drop and expand the legs,gravity, with the other.
User avatar
seattlejack
Teardrop Inspector
 
Posts: 8
Images: 22
Joined: Mon Sep 29, 2008 11:43 am
Location: Seattle
Top

Re: homemade gasless gas struts

Postby MontanaTeardrops » Fri Sep 06, 2013 5:28 pm

Looks like some pretty ingenious inventors and craftsman on here. I think I'll try to find some affordable gas struts, but so far I haven't found any. Those links didn't seem to take me to them. Anyone know of any other sources? I thought about going to a wrecking yard and getting a couple off a hatchback car.
Image
User avatar
MontanaTeardrops
Donating Member
 
Posts: 58
Joined: Sat Aug 17, 2013 11:12 am
Location: Montana
Top

Re: homemade gasless gas struts

Postby KennethW » Fri Sep 06, 2013 9:57 pm

Has anyone (besides me) stored your struts across the inside of the hatch? I hinged tubing on the top inside the hatch. So that when stored they go across the inside of the hatch. Over 46" length to work with. To open the hatch you lift the hatch. pull down the tubing and fit the drilled end of the over a pin on the side wall. Really easy to set up.
KennethW
1000 Club
1000 Club
 
Posts: 1188
Images: 82
Joined: Wed Feb 20, 2013 8:01 pm
Top

Re: homemade gasless gas struts

Postby Tomterrific » Fri Sep 04, 2015 5:55 pm

I stressed over how I would make my hatch struts. In the end I used a damaged leg from an EZ-UP canopy. Now I need another but it should not be difficult as I've seen several in the trash at camps. In my case, I merely sawed off the top to size, drilled a hole to screw into the hatch and screwed the foot of the prop to the floor. I lift the hatch up and the prop/leg extends, then the spring loaded button clicks holding it securely. Easy peazy!

TomT
Attachments
IMG_20150831_190415.jpg
IMG_20150831_190415.jpg (124.48 KiB) Viewed 10808 times
Tomterrific
500 Club
 
Posts: 611
Images: 8
Joined: Thu Mar 26, 2015 3:18 pm
Location: Central Ohio
Top

Previous

Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: Google [Bot] and 7 guests