#3500 axle

Anything to do with mechanical, construction etc

#3500 axle

Postby Rickxr2 » Sun Mar 06, 2005 12:40 pm

I realize it is overkill, buy is there a disadvantage to a #3500 axle, other than the cost? The company building my frame had a concern of putting 14" wheels on the #2000 axle he normally uses.
Thanks,
Rick
Image Image Image
User avatar
Rickxr2
The 300 Club
 
Posts: 389
Images: 125
Joined: Sat Mar 05, 2005 10:17 pm
Location: Oklahoma, Broken Arrow

Postby SteveH » Sun Mar 06, 2005 1:04 pm

Rick,

The only things I can think of are unnessesary weight and the suspension may be a little ruff. If you are using leaf springs, the suspension can be dealt with.
SteveH
Calling an illegal alien an "undocumented immigrant"is like calling a drug dealer an "unlicensed pharmacist ".
User avatar
SteveH
2000 Club
2000 Club
 
Posts: 2101
Images: 42
Joined: Mon Nov 01, 2004 8:28 am
Location: Bexar Co, TX

Postby Nitetimes » Sun Mar 06, 2005 2:46 pm

I've been running 14' wheels on 2k axles for years, never had any issuses with it. As long as you don't blow the tires up hard as a rock it should never be a problem.
We sold lots of them that way when I worked for a trailer manufacturer.
Rich


Image
ImageImage
-
The strongest reason for the people to retain the right to
keep and bear arms is, as a last resort, to protect themselves
against tyranny in government.
- Thomas Jefferson -
Personally, I carry a gun because I'm too young to die and too old to take a butt kickin'.
User avatar
Nitetimes
7000 Club
7000 Club
 
Posts: 7909
Images: 194
Joined: Sat Feb 12, 2005 12:44 am
Location: Butler,PA
Top

Postby David Grason » Sun Mar 06, 2005 3:16 pm

The 3500# axles have an arch to them that is designed to straighten out under a heavy load. That way, when you're running loaded, the tires track straight and wear evenly. When running unloaded, the tires will be farther apart at the top than at the bottom and will wear a little unevenly.

But of course, if there isn't any weight on them, even if they are wearing unevenly, they certainly won't wear out any time soon. But at least now you'll know.
I am NOT a complete idiot! Some of the pieces are missing.
User avatar
David Grason
Teardrop Master
 
Posts: 290
Joined: Tue Nov 16, 2004 8:50 am
Location: Nashville, Tn.
Top

Postby Nitetimes » Sun Mar 06, 2005 3:45 pm

David Grason All of your axles these days (2k, 3500#, 6k, ect.) will have an arch in them that should be up when mounted correctly. If you get an axle that is straight it is probably used and used hard or it is very poor quality. If you look at a trailer that has the bow down either the axle was installed wrong or it was overloaded frequently.
Rich


Image
ImageImage
-
The strongest reason for the people to retain the right to
keep and bear arms is, as a last resort, to protect themselves
against tyranny in government.
- Thomas Jefferson -
Personally, I carry a gun because I'm too young to die and too old to take a butt kickin'.
User avatar
Nitetimes
7000 Club
7000 Club
 
Posts: 7909
Images: 194
Joined: Sat Feb 12, 2005 12:44 am
Location: Butler,PA
Top

Postby len19070 » Sun Mar 06, 2005 4:52 pm

Your Manufactures concerns over using a 14" wheel on a 2000lb axel would concern ME. 14" wheels on 2000lb axels is very comon place. I would ask EXACTLY what are His concerns. Maybe he knows something we don't know. Everything is done for a reason.

Len
:peace: :peace: :peace: :peace: :peace:
http://s26.photobucket.com/user/len1907 ... 20trailers

"If you do good things, good things will happen to you"..... Earl Hickey
User avatar
len19070
3000 Club
3000 Club
 
Posts: 3054
Images: 24
Joined: Tue Aug 17, 2004 7:44 pm
Location: S.E Pa. Morton
Top

Postby Rickxr2 » Sun Mar 06, 2005 8:35 pm

Thanks for the suggestions, it helped alot. Turn in my order Monday and soon I'll be the proud owner of a chassis to set my cardboard prototype on.
Image Image Image
User avatar
Rickxr2
The 300 Club
 
Posts: 389
Images: 125
Joined: Sat Mar 05, 2005 10:17 pm
Location: Oklahoma, Broken Arrow
Top

Postby emiller » Sun Mar 06, 2005 9:52 pm

I think if you look on the side walls of a tire you will see the pounds it can carry and if not mistaken two 14 inch tires can carry more than 2000#. When I buy tires for work the small 5.70-8 c load rated are 910 lbs ea. the 14's are 1410 lbs ea that meens the 2000# axle is under size for 14 or larger tires. 8)
User avatar
emiller
Donating Member
 
Posts: 3421
Images: 157
Joined: Sun Jun 13, 2004 11:00 pm
Location: Arizona, Phoenix
Top

Postby Gerdo » Sun May 22, 2005 5:07 pm

Does anyone have any thoughts on removing a leaf from the spring pack on a 3500# axle to get a softer ride? Are there any problems with this?
User avatar
Gerdo
1000 Club
1000 Club
 
Posts: 1361
Images: 156
Joined: Mon Apr 25, 2005 12:02 am
Location: Littleton, Colorado
Top

Postby JunkMan » Sun May 22, 2005 5:17 pm

Gerdo wrote:Does anyone have any thoughts on removing a leaf from the spring pack on a 3500# axle to get a softer ride? Are there any problems with this?


I had a dunebuggy trailer that had tandem 2500 pound axels, and was pretty stiff considering the buggy only weighed about 1000 pounds, so we took some leaves out, and it worked fine. Been using it that way for 15 years.

You might need to remove all but the main leaf. The main leaf will still be stiffer than a lighter axel spring, but it might be OK.
Jeff & Odie
Black Hills of South Dakota
User avatar
JunkMan
500 Club
 
Posts: 974
Images: 50
Joined: Sun Oct 24, 2004 6:21 pm
Location: Rapid City, South Dakota
Top

14" on 2K axles

Postby So-Cal Teardrops » Sun May 22, 2005 7:40 pm

The axles that we get have two different spindle sizes for the 2K axles. One is smaller and the mfg. doesn't recommend anything larger than 13", the one we use has a bigger spindle and bigger bearings and is designed for 14's or 15's.

See if they have the bigger spindle.

Happy building.
User avatar
So-Cal Teardrops
Teardrop Master
 
Posts: 103
Joined: Wed May 18, 2005 4:02 pm
Location: Ontario, California
Top

Postby Southern Oregon Bob » Sun May 22, 2005 10:02 pm

I'm not on the road yet but I bought a 3500# axle and leaf springs from a fabricator who builds trailers. He recomended the larger axle for offroad and gave me new spring ratings for the 3500# springs depending on wether I removed 1 or 2 leafs. With 29" tires there was a full 1.25" differance between the tires measuring at the top then at the bottom with no load. I was wondering if taking some of that bow out would be a good idea either by cutting or maybe even with my tractor? :thinking: Bob
User avatar
Southern Oregon Bob
Teardrop Advisor
 
Posts: 59
Images: 2
Joined: Tue Mar 01, 2005 11:08 pm
Location: Southern Oregon
Top

Postby JunkMan » Sun May 22, 2005 10:13 pm

Southern Oregon Bob wrote: I was wondering if taking some of that bow out would be a good idea either by cutting or maybe even with my tractor? :thinking: Bob


Do you mean cutting the springs? I would think that the heat from cutting them would weaken them, unless you used something like a sawzall.
Jeff & Odie
Black Hills of South Dakota
User avatar
JunkMan
500 Club
 
Posts: 974
Images: 50
Joined: Sun Oct 24, 2004 6:21 pm
Location: Rapid City, South Dakota
Top

Postby Gerdo » Sun May 22, 2005 10:36 pm

Leaf spring packs are held together by a locating pin/bolt and then the "U" bolts that hold the axle on. HYPOTHETICALY SPEEKING If one wanted to remove a leaf or two one would unbolt the ubolts and then remove the locating pin. Remove a leaf and then reassemble. If the locating pin/bolt breaks you can pick one up at your local spring repair shop. This way if you don't like the ride or ride height you can reverse the process.
User avatar
Gerdo
1000 Club
1000 Club
 
Posts: 1361
Images: 156
Joined: Mon Apr 25, 2005 12:02 am
Location: Littleton, Colorado
Top

Postby emiller » Mon May 23, 2005 7:11 am

I went with a 2000# axle from northern tool and hit a pot hole in L.A. on the way back from Morro Bay, CA to Phoenix, AZ and when I got home a saw my wheel was leaning inward at the top (bent axle) so I ordered a 3500# 4" drop axle from ABC trailers in Moulton, AL and it's nice to have piece of mind. I also installed a 3500# drop axle on my new teardrop.
User avatar
emiller
Donating Member
 
Posts: 3421
Images: 157
Joined: Sun Jun 13, 2004 11:00 pm
Location: Arizona, Phoenix
Top

Next

Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: Google [Bot] and 15 guests