doug hodder wrote:I'll drag it up to the Dam! You bring down your Sears stuff! Doug
doug hodder wrote:I'd pressure up the tank and put it in a bucket of water and see if it has penetrated the tank or is just a crease in it. It can always be soldered, the ends on the tank are soldered anyway, or braze it with brass if you don't want the soldered look. If you are unsure about doing it, check with a radiator shop. Just an idea. Doug
rainjer wrote:doug hodder wrote:I'd pressure up the tank and put it in a bucket of water and see if it has penetrated the tank or is just a crease in it. It can always be soldered, the ends on the tank are soldered anyway, or braze it with brass if you don't want the soldered look. If you are unsure about doing it, check with a radiator shop. Just an idea. Doug
After you do your repair, you could coat the inside with POR-15.
Jeremy
Return to Vintage Camping Equipment
Users browsing this forum: No registered users and 3 guests