For those of you who have used the RV Insert Edge Molding:
I've found two types at my local RV parts house. One has a wider downward lip (a little less than an inch) while the other is much narrower. I think I would like to use the wider version, especially on the hatch instead of some sort of aluminum angle.
1. Has anyone here used this wider molding and how difficult is it to bend and shape this material by hand? (I've heard this is quite easy with the standard?/narrow insert molding).
2. Is this molding a good choice for the hatch edges?
I would need to work it around a 24 inch radius on the front and 48 inch radius on the rear.