choosing a axle

Anything to do with mechanical, construction etc

choosing a axle

Postby tedwards » Mon Aug 22, 2005 4:50 pm

finally i have made a decision on building a tiny trailer with a modern look. which axle should i go with 2000 or 3500 lb? the trailer will be around 15ft x6'8 and will sleep three.
2fast4u
tedwards
Teardrop Inspector
 
Posts: 8
Joined: Sat Jul 16, 2005 9:46 am
Location: williamston, nc

Postby SteveH » Mon Aug 22, 2005 6:11 pm

What I would do is calculate the total weight you expect the trailer to come in at, and multiply by two. You don't want a 2000 pound axel continuosly carrying 2000 pounds.
SteveH
Calling an illegal alien an "undocumented immigrant"is like calling a drug dealer an "unlicensed pharmacist ".
User avatar
SteveH
2000 Club
2000 Club
 
Posts: 2101
Images: 42
Joined: Mon Nov 01, 2004 8:28 am
Location: Bexar Co, TX

Postby ralaco » Mon Aug 22, 2005 6:26 pm

2fast4u

At least you are going to go with a very light weight trailer 2000 lb is a popular one for a teardrop.

My choice is Flexiride Torsion axle.

You can order from:

UCF Flexiride manufactures and markets the Flexiride® rubber torsion axle.

http://www.ucfamerica.com/
800-225-1845
856-488-1800
Fax: 856-488-9636
E-mail: [email protected]

Send an e-mail to the salesman:

Jacques Angers
[email protected]

You can read this:
http://tnttt.com/viewtopic.php?t=4318


Raul

:twisted:
User avatar
ralaco
Teardrop Master
 
Posts: 176
Images: 16
Joined: Tue Nov 09, 2004 11:42 am
Location: Monterrey, Mexico
Top

Postby Chris C » Mon Aug 22, 2005 6:27 pm

You also might ask our "resident" engineer from England, Andrew. When it comes to that sort of thing, he has all the numbers. :thumbsup:
Chris :D

The tension between what is good enough and what is beyond that creates the space for character to become our work.

Teardrop Trailer Build Pictures: http://tinyurl.com/px5cd
Chris C
.
 
Posts: 3302
Joined: Sun May 15, 2005 7:24 pm
Location: Norman, Oklahoma
Top

Postby madjack » Mon Aug 22, 2005 7:31 pm

..Te, a very good rule of thumb is to figure what your total weight would be loaded up and add at least 50% capacity to that...for example, 1000#s total should have at the least a 1500# axle under it, 1500#s=2250#axle, ect, ect.
I also recommend a torsion axle, either a flexiride or dexter...the dexter is readily available at more place and may be a little cheaper
madjack 8)
...I have come to believe that, conflict resolution, through violence, is never acceptable.....................mj
User avatar
madjack
Site Admin
 
Posts: 15128
Images: 177
Joined: Thu Dec 02, 2004 5:27 pm
Location: Central Louisiana
Top

Postby tedwards » Mon Aug 22, 2005 9:55 pm

what is with the torsion axle verses the leaf spring axle?
2fast4u
tedwards
Teardrop Inspector
 
Posts: 8
Joined: Sat Jul 16, 2005 9:46 am
Location: williamston, nc
Top

Postby bledsoe3 » Tue Aug 23, 2005 12:48 am

I have to believe that with a trailer that big, you'll probably need the bigger axle. Many of the users here have the 2000# axle for a more traditional sized teardrop. As for torsion vs spring, it's like independant suspension for your trailer. Some are even adjustable for ride height. Just my opion. Again, Andrew is the expert. He will probably respond. Jim
If you do what you've always done, you'll get what you've always got.
User avatar
bledsoe3
3000 Club
3000 Club
 
Posts: 3694
Images: 112
Joined: Tue Jun 07, 2005 5:55 am
Location: Oregon, Portland
Top

Postby JunkMan » Tue Aug 23, 2005 8:44 am

tedwards wrote:what is with the torsion axle verses the leaf spring axle?


On light trailers, torsional axels seem to work better than springs. You can also get the trailer to set lower by using torsional axels instead of springs.

I am using a torsional axel because I am tired of worn out shackels on spring axels. I don't know if I will pull my tear far enough to wear out the shackles, but the shackles on my utility trailers are all getting sloppy.
Jeff & Odie
Black Hills of South Dakota
User avatar
JunkMan
500 Club
 
Posts: 974
Images: 50
Joined: Sun Oct 24, 2004 6:21 pm
Location: Rapid City, South Dakota
Top

Postby angib » Tue Aug 23, 2005 9:54 am

bledsoe3 wrote:Andrew is the expert. He will probably respond. Jim

Hey, I haven't applied for the 'expert' job vacancy - don't I have to do that, before you're allowed to appoint me? :lol:

I like madjack's rule of thumb - it sounds just right to me. So a 2000lb axle needs a basic trailer weight of ~1300lb.

2fast4u, if you're going to build a trailer 15' x 6'8", I think you'd have to concentrate on building it light to be sure to get it under 1300lb. If you just want to add 3/4" ply when and where you want, a 3500lb axle would be a better choice.

One advantage of a leaf spring axle is that you could fit a 3500lb axle and then swap the springs if the trailer weighs well under 2000lb - this would avoid the possible problem of beating up the trailer with ultra-stiff springs.

Andrew
User avatar
angib
5000 Club
5000 Club
 
Posts: 5783
Images: 231
Joined: Fri Apr 30, 2004 2:04 pm
Location: (Olde) England
Top

Postby bledsoe3 » Tue Aug 23, 2005 10:03 am

angib wrote:
bledsoe3 wrote:Andrew is the expert. He will probably respond. Jim

Hey, I haven't applied for the 'expert' job vacancy - don't I have to do that, before you're allowed to appoint me? :lol: Andrew

It's not just me. Ask almost any user on this site. When it comes to technical stuff, you da man! Jim :SG
If you do what you've always done, you'll get what you've always got.
User avatar
bledsoe3
3000 Club
3000 Club
 
Posts: 3694
Images: 112
Joined: Tue Jun 07, 2005 5:55 am
Location: Oregon, Portland
Top


Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: No registered users and 14 guests