Spars (roof supports)

Anything to do with mechanical, construction etc

Spars (roof supports)

Postby derekxcole » Tue Feb 07, 2006 7:53 pm

What did you use for spars on your tear drop?
User avatar
derekxcole
Teardrop Advisor
 
Posts: 50
Images: 1
Joined: Tue May 24, 2005 6:43 pm
Location: Ellsworth, Maine

Postby Boodro » Tue Feb 07, 2006 8:01 pm

Hey Derek, I used 1x2 Poplar, you can use Pine if it suits you. Some have used Oak. Poplar is said to be more stable than pine(less warping) . You can pretty much use what ever you want. A lot depends on how thick you want your roof to be.I know that as costs go , Pine is the cheapest , then Poplar then Oak is usually the most expensive of those 3. Just my 2 sense worth. :)
Got any pics? Good luck with your build.
We are all travelers in this world , from the sweet grass to the packin house , birth till death , we travel between the eternities . ( Robert Duvall as Prentiss Ritter)
User avatar
Boodro
1000 Club
1000 Club
 
Posts: 1052
Images: 101
Joined: Sun Oct 10, 2004 9:35 pm
Location: Sylvania, Ohio

Postby derekxcole » Tue Feb 07, 2006 8:07 pm

Can you get Pine and or Poplar at a Home Depot store? How much does Poplar go for?
Image
This is my profile. I am going to work on some sort of detachable galley, and I am thinking of a canvas roof. I am pulling with a car so less weight is a good thing.
User avatar
derekxcole
Teardrop Advisor
 
Posts: 50
Images: 1
Joined: Tue May 24, 2005 6:43 pm
Location: Ellsworth, Maine
Top

Postby mikeschn » Tue Feb 07, 2006 8:08 pm

I prefer pine. It's light weight... it's affordable... and it's easy to put a screw into...

I have been known to use poplar and oak on the spar that supports the hatch!

Mike...
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
User avatar
mikeschn
Site Admin
 
Posts: 19202
Images: 479
Joined: Tue Apr 13, 2004 11:01 am
Location: MI
Top

Postby Boodro » Tue Feb 07, 2006 8:15 pm

Derek , yes you should be able to get all 3 species there. Poplar is just pennies more than Pine as you won't need a truck load of them. I bought all mine as 8 footers , then cut them in half & I think I had a total of 9 spars & I used a Pine 2x4 for the hatch hinge mount. I agree with Mike tho , Pine works just fine as long as you pre drill each screw hole as in any small size lumber. :thumbsup:
We are all travelers in this world , from the sweet grass to the packin house , birth till death , we travel between the eternities . ( Robert Duvall as Prentiss Ritter)
User avatar
Boodro
1000 Club
1000 Club
 
Posts: 1052
Images: 101
Joined: Sun Oct 10, 2004 9:35 pm
Location: Sylvania, Ohio
Top

Postby derekxcole » Tue Feb 07, 2006 8:15 pm

Has anyone seen a canvas roof on a tear? I could just roll up the canvas to get the bikes out and to use a stove in the galley(if I even manage to get one in there).
It would make the tear much more light weight and it would save me a lot of frustration because I wouldn't have to build the hatch.
User avatar
derekxcole
Teardrop Advisor
 
Posts: 50
Images: 1
Joined: Tue May 24, 2005 6:43 pm
Location: Ellsworth, Maine
Top

Postby alaska teardrop » Tue Feb 07, 2006 9:43 pm

Derek - 1" square steel tubing. But I call them ribs. Spars belong up in the rigging of a boat. ;) Fred :snowstorm: Still freezing, but warmed up 85*
Northern Lite Traveler design: viewtopic.php?f=27&t=51991
Minimalist torsion axle frame: viewtopic.php?f=35&t=12220
Alaska Teardrop photo gallery: http://tnttt.com/gallery/album.php?album_id=2014
Glampette photo gallery; gallery/album.php?album_id=2983&sk=t&sd=d&st=0
User avatar
alaska teardrop
Platinum Donating Member
 
Posts: 1112
Images: 177
Joined: Wed Aug 24, 2005 1:41 pm
Location: Greenville, Michigan
Top

Postby Hardin Valley Magic » Tue Feb 07, 2006 9:51 pm

Derek I used 2x2 pine for spars and for studs no real problems. However if the are cut out of a 2x6 or 2x4 like mine were, don't leave them lying around on a concrete floor for very long. Or they will warp and look more like rocking chair bottoms. :lol:
Fred, 85* what did you do put the thermometer in the oven! :lol: :lol:
aka Steven D.
User avatar
Hardin Valley Magic
Donating Member
 
Posts: 548
Images: 45
Joined: Wed Sep 14, 2005 9:45 pm
Location: Knoxville Tenn.
Top

Postby alaska teardrop » Tue Feb 07, 2006 10:17 pm

Steven - Nope, that would be cheating! :lol: :lol: :lol:
Northern Lite Traveler design: viewtopic.php?f=27&t=51991
Minimalist torsion axle frame: viewtopic.php?f=35&t=12220
Alaska Teardrop photo gallery: http://tnttt.com/gallery/album.php?album_id=2014
Glampette photo gallery; gallery/album.php?album_id=2983&sk=t&sd=d&st=0
User avatar
alaska teardrop
Platinum Donating Member
 
Posts: 1112
Images: 177
Joined: Wed Aug 24, 2005 1:41 pm
Location: Greenville, Michigan
Top

Postby Hardin Valley Magic » Tue Feb 07, 2006 10:20 pm

Fred, o.k. then let me see here..... -60 to plus 25 .. Yep that would be 85* .. :lol: :lol:
aka Steven D.
User avatar
Hardin Valley Magic
Donating Member
 
Posts: 548
Images: 45
Joined: Wed Sep 14, 2005 9:45 pm
Location: Knoxville Tenn.
Top

Postby alaska teardrop » Tue Feb 07, 2006 10:26 pm

Yup - Springtime's comin' your way. Gaining 7 minutes of daylight per day too! 8)
Northern Lite Traveler design: viewtopic.php?f=27&t=51991
Minimalist torsion axle frame: viewtopic.php?f=35&t=12220
Alaska Teardrop photo gallery: http://tnttt.com/gallery/album.php?album_id=2014
Glampette photo gallery; gallery/album.php?album_id=2983&sk=t&sd=d&st=0
User avatar
alaska teardrop
Platinum Donating Member
 
Posts: 1112
Images: 177
Joined: Wed Aug 24, 2005 1:41 pm
Location: Greenville, Michigan
Top

Postby bledsoe3 » Wed Feb 08, 2006 12:46 am

alaska teardrop wrote:Derek - 1" square steel tubing. But I call them ribs. Spars belong up in the rigging of a boat. ;) Fred :snowstorm: Still freezing, but warmed up 85*

Almost time for shorts and a tank top huh? :lol:
If you do what you've always done, you'll get what you've always got.
User avatar
bledsoe3
3000 Club
3000 Club
 
Posts: 3694
Images: 112
Joined: Tue Jun 07, 2005 5:55 am
Location: Oregon, Portland
Top

Postby madjack » Wed Feb 08, 2006 12:48 am

alaska teardrop wrote:Yup - Springtime's comin' your way. Gaining 7 minutes of daylight per day too! 8)


...get out the shorts and the sunscreen...it's time to catch some rays :D :lol: ;) ..................................... 8)
...I have come to believe that, conflict resolution, through violence, is never acceptable.....................mj
User avatar
madjack
Site Admin
 
Posts: 15128
Images: 177
Joined: Thu Dec 02, 2004 5:27 pm
Location: Central Louisiana
Top

Postby 48Rob » Wed Feb 08, 2006 8:35 am

Pine, Poplar, and Oak are all good, though "Pine" in general conversation can mean any of a number of species, depending what part of the country you're from.

The best "Pine" I've come across is Southern yellow Pine.
It is used extensively for roof trusses, headers, and other weight bearing applications in home and industrial building...because of its strength.

It is heavier than your standard variety of Pine, but usually several times stronger.
Choose a piece(s) with perfectly straight grain, and rip out the ribs needed.

Poplar is slightly stronger than "Pine" generally more stable, and takes paint very well, though is difficult to use on a project that will be stained because of its wild variety of colors, the most prominant of which is green.

Oak is rather heavy, but also very strong.
Good use for Oak is the ribs that hold your hatch hinge.
As has been mentioned, some of these woods are very expensive, especially the ones that are sold as individual pieces wrapped in plastic.
They are obviously designed for the weekend project where the builder would rather pay for convenience...

Menards is a good example, you can buy the very expensive prewrapped pieces, or you can choose from their bin of rough edged, and odd length Oak boards...at a 75% savings.
All you have to do is cut them to size...

Though generally known in the building world, a couple things new builders might not...

Always pre drill!!
And when choosing/using lumber, leave the pieces with knots at the store.
It costs more for premium lumber that doesn't have knots, but a structural rib with a decent sized knot will snap like a match stick with only minor pressure applied.

Obviously not everyone can afford premium lumber, but if you're building a trailer, cutting large pieces of wood into smaller pieces of wood is part of the build, and a good way to get good lumber for a fair price.

Rob
Waiting for "someday" will leave you on your deathbed wondering why you didn't just rearrange your priorities and enjoy the time you had, instead of waiting for a "better" time to come along...
User avatar
48Rob
Super Lifetime Member
 
Posts: 3882
Images: 4
Joined: Thu Nov 17, 2005 6:47 pm
Location: Central Illinois
Top

Postby Denny Unfried » Wed Feb 08, 2006 12:06 pm

I used 1X2 poplar for the ribs not only because it is very stable but it glues and holds screws very well. Also, living in termite country it is very insect and dry-rot resistant.

Denny
aka - "Uncle Denny"
<img src="http://www.uncledennyscorner.com/teardrop/photos/Linux.gif">
User avatar
Denny Unfried
sprint car builder/racer & all that jazz
 
Posts: 411
Joined: Mon Jun 21, 2004 8:54 am
Location: So Bay, CA
Top

Next

Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: No registered users and 12 guests