Okay guys,
This morning I painted, and glued and whatever to myriad samples...
I let everything cure for 4 hours, or so... and then proceded to peel the skins off... Here's what I found...
Each movie is only a few seconds long, so don't be afraid to click on the links... (these are quicktime movies, so it's probably best if you have quicktime player installed!
1 part epoxy acrylic paint on foam
http://www.mikenchell.com/images/MVI_1548.MOV
exterior latex on foam
http://www.mikenchell.com/images/MVI_1549.MOV
exterior latex on wood
http://www.mikenchell.com/images/MVI_1550.MOV
1 part epoxy paint on wood
http://www.mikenchell.com/images/MVI_1551.MOV
5 minute epoxy on foam
http://www.mikenchell.com/images/MVI_1552.MOV
polyester resin on foam with bedsheet
http://www.mikenchell.com/images/MVI_1553.MOV
polyester resin on foam with fiberglass cloth
http://www.mikenchell.com/images/MVI_1554.MOV
Zinsser Primer Sealer on foam
http://www.mikenchell.com/images/MVI_1555.MOV
polyester resin on wood with fiberglass
http://www.mikenchell.com/images/MVI_1556.MOV
Titebond III on foam
http://www.mikenchell.com/images/MVI_1557.MOV
polyester resin on wood with bedsheet
http://www.mikenchell.com/images/MVI_1558.MOV