Drilling Fiber Glass Fenders.

Anything to do with mechanical, construction etc

Drilling Fiber Glass Fenders.

Postby Mightydog » Tue Mar 07, 2006 11:46 am

Sorry if this question is a deuce, but I have a pair of R W Johnson fenders that are beeeeeeautiful. To keep them that way while they are mounted on the trailer, I need to know how to drill them for the bolts to hold them on.

Fast speed or slow?
Titanium bit?
Put a piece of backing wood on it?
Standing or sitting?
Light beer or dark?


I dunno--help!
Mightydog
1000 Club
1000 Club
 
Posts: 1220
Images: 0
Joined: Tue Aug 09, 2005 7:21 pm

Postby mudgepondexpress » Tue Mar 07, 2006 11:50 am

I think the best bit for this work is a Unibit! they leave a smooth hole, don't grab and can actually do a small taper/countersink. Use a soft wood backing and a medium speed (the unibits need a little more speed than the regular bits, but I don't turn them faster than half "throttle" on my Milwaukee 1/2 hole shooter...aprx 400-500 rpms.

Kenny
mudgepondexpress
Teardrop Inspector
 
Posts: 3
Joined: Tue Oct 25, 2005 3:48 pm
Location: Spokane, WA

Postby mikeschn » Tue Mar 07, 2006 11:58 am

Steve drilled the holes in mine, so I'd have to ask him... However I can tell you that he used threaded inserts in the sidewalls, and panhead type bolts with a bumper washer underneath it to spread out the load...

Mike...
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
User avatar
mikeschn
Site Admin
 
Posts: 19202
Images: 479
Joined: Tue Apr 13, 2004 11:01 am
Location: MI
Top

Postby Mightydog » Tue Mar 07, 2006 12:56 pm

Good stuff everyone.

I knew we picked up that package of unibits at Costco for a reason.

Yeah, thanks for the mention, Mike. We were thinking of using fender (!!) washers on the inside and outside to spread the load. Imagine using fender washers on fenders! After all these years of using them for everything else.
Mightydog
1000 Club
1000 Club
 
Posts: 1220
Images: 0
Joined: Tue Aug 09, 2005 7:21 pm
Top

Drilling Fiber Glass . . . .

Postby rooster » Tue Mar 07, 2006 1:06 pm

You might want to check out "Elevator bolts" at your hardware store. They have a large flat head that will sit flush with the inside of your tear. I used 1/4" or 3/8" and the flat head was about 1-1/4" or 1-1/2" across. Just a 3 cent thought . . . .

Jim, :thinking:
Beware of what she wishes....especially with that twinkle in her eye and that mischievious smile....you know it's gonna cost....
User avatar
rooster
Donating Member
 
Posts: 459
Images: 42
Joined: Sat Jul 23, 2005 7:48 pm
Location: Soldotna, Alaska
Top

Postby SteveH » Tue Mar 07, 2006 2:27 pm

The main thing with fiberglass fenders in not the drilling of the holes, but the washers you use bolting them on. Always use the largest fender washer you can get with fiberglass. If you don't they will work under the fastener and the bolt/nut will literally eat all the way thru the fiberglass.
SteveH
Calling an illegal alien an "undocumented immigrant"is like calling a drug dealer an "unlicensed pharmacist ".
User avatar
SteveH
2000 Club
2000 Club
 
Posts: 2101
Images: 42
Joined: Mon Nov 01, 2004 8:28 am
Location: Bexar Co, TX
Top

Postby Steve_Cox » Tue Mar 07, 2006 4:26 pm

Looks like many different ways to drill.. I used a brad point bit backed up with soft wood. Also made neoprene washers the size of the fender washers I used. Elevator bolts, didn't use them but that's a good idea if you need a clean flat surface on the bolt head. McMaster.com has them. I used tee-nuts behind the trim on my TD then ran the bolts thru the fender with the neoprene washer, fender washer, nylock nut.

8)
Steve
User avatar
Steve_Cox
4000 Club
4000 Club
 
Posts: 4903
Images: 196
Joined: Sun Apr 03, 2005 8:46 am
Location: Albuquerque New Mexico
Top

Postby Steve Frederick » Tue Mar 07, 2006 5:12 pm

mikeschn wrote:Steve drilled the holes in mine, so I'd have to ask him... However I can tell you that he used threaded inserts in the sidewalls, and panhead type bolts with a bumper washer underneath it to spread out the load...

Mike...


Yup! Use a sharp bit, I used 1/4". As Mike mentioned, I used threaded inserts, also for 1/4", bolted them on with 1" long S/S bolts with fender washers, (hence the name?), with a bit of silicone sealant in the insert, as a waterproofing, locking measure. I think I used 6, or so bolts/side..Mike could count them, Mine is in a shelter, buried in snow!
Blessings, Steve
Adirondacks, Upstate New York
Building Journals
The Shop Manual's 8-years old!! Thank's everyone!
New! 'Rondack Lodge Plans!Order Here!
Image
User avatar
Steve Frederick
Custom Teardrop Builder
 
Posts: 1984
Images: 29
Joined: Thu Apr 15, 2004 5:02 pm
Location: Upstate New York, Adirondacks (Great Sacandaga Lake)
Top

Postby Mitheral » Tue Mar 07, 2006 5:15 pm

I really like stainless for stuff like this. Yes it's like 5-10X the cost but you need so few and they won't rust solid after five years of constant sand and water spray. Plus you won't get ugly rust stains on the fiberglass.

One other hint: The holes in your fenders should be a bit larger than the bolt you are using. Allows for some fine adjustment and it lets the fender expand and contract at differnent rates than the wood body.
Mitheral
Teardrop Master
 
Posts: 179
Images: 19
Joined: Mon Sep 05, 2005 12:05 pm
Location: Canada
Top

Postby asianflava » Tue Mar 07, 2006 5:40 pm

Yes a Unibit or Christmas tree bit is probably the best for drilling the fiberglass fenders. It also makes it easier because you don't have to go back and find the next size if you have to.

I'd also suggest wearing some disposable gloves. My hands were itching afterwards. Money never came my way so I assume it was from the fiberglass.
User avatar
asianflava
8000 Club
8000 Club
 
Posts: 8412
Images: 45
Joined: Mon Aug 02, 2004 5:11 am
Location: CO, Longmont
Top

Postby angib » Tue Mar 07, 2006 5:58 pm

asianflava wrote:I'd also suggest wearing some disposable gloves. My hands were itching afterwards. Money never came my way so I assume it was from the fiberglass.

If you are sensitive to fiberglass dust (most people are who don't use it all the time), it isn't very effective to try to wash it off - the trick is to get a lump of putty or anything sticky like that and roll it around your hands - the stickiness will pull all the fiberglass dust off.

You can use sticky tape, but unless you've shaved your hands first, you're gonna wish you'd decided just to put up with the itching.......

Andrew
User avatar
angib
5000 Club
5000 Club
 
Posts: 5783
Images: 231
Joined: Fri Apr 30, 2004 2:04 pm
Location: (Olde) England
Top

Postby Mightydog » Wed Mar 08, 2006 5:05 pm

Again, thanks for all of the help everyone.
Mightydog
1000 Club
1000 Club
 
Posts: 1220
Images: 0
Joined: Tue Aug 09, 2005 7:21 pm
Top

Postby Bandit » Wed Mar 08, 2006 9:15 pm

You may also want to use some easy stick masking tape over the area to be drilled. This will help eliminate and splintering and chipping.
:thumbsup:
First Metal Cut 02/11/06
Complete! (Almost) 08/22/06
Looking for a trip in the SPRING!!!!
Not Up to Testing the Heater!!!
Thanks for all the HELP!!!!
User avatar
Bandit
Donating Member
 
Posts: 207
Joined: Tue Dec 06, 2005 12:25 pm
Location: McMinnville, TN
Top

Postby fornesto » Thu Mar 09, 2006 11:50 am

I would second the use of neoprene, or other foam-like washer. This might keep the big washer from cutting through the fiberglass.
User avatar
fornesto
Donating Member
 
Posts: 774
Joined: Fri Jun 25, 2004 5:12 pm
Location: Lodi, CA
Top

Postby Denny Unfried » Thu Mar 09, 2006 12:41 pm

I just used a regular drill bit to drill my R. W. Johnson fenders. Then, I transfered the holes to the side of the trailer and installed threaded inserts without going all the way through. Some short studs with Locktite on them were installed then fender washers and nuts. Kind of a ghost image superimposed below to illustrate. Haven't fallen off yet :D

Denny
Image
aka - "Uncle Denny"
<img src="http://www.uncledennyscorner.com/teardrop/photos/Linux.gif">
User avatar
Denny Unfried
sprint car builder/racer & all that jazz
 
Posts: 411
Joined: Mon Jun 21, 2004 8:54 am
Location: So Bay, CA
Top

Next

Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: No registered users and 9 guests