What is the best exterior covering?

Anything to do with mechanical, construction etc

What is the best exterior covering?

Postby Katie&Craig » Sat Mar 11, 2006 2:21 pm

I know this is more of an opinion question, but I’d like to take advantage of the vast experience of the forum members. What is the best exterior covering that meets the following criteria/limitations?

Low maintenance:
I have a hard enough time keeping my car washed, so don’t really see myself polishing the exterior that often. (yes I will check my bearings and other safety maintenance things often). Also we don’t have a place to store it, so a cover or tarp is the best we can do.

Durable:
Will be used off-road, so I expect it to get dinged by rocks and scratched by the occasional large woody shrub. I don’t mind it looking like it gets used, but since the exterior will be a protective coating as well, I don’t want something that is no longer effective if dinged or scratch.

Reasonably low cost:
Low cost is good since otherwise we can’t afford it. Also, something that can be inexpensively and easily replaced if the exterior starts to get too worn would be good.

No white:
I don't want to offend anyone, so this is strickly a personal preference. I don't want MY TD to be white because it makes me think of the big RVs, which I don't want to emulate. Ok, I'll be flexible on this one - guess I could always paint over it if the substance is white.

I am sure this has been addressed early, but I got too many hits on my search! There was a poll asking what exterior coatings were used, but it didn’t really address what situation they would be used in.
All thoughts are welcome!
Katie
Katie&Craig
Teardrop Advisor
 
Posts: 51
Images: 4
Joined: Thu Feb 23, 2006 4:33 pm
Location: Seattle, WA

Postby Steve_Cox » Sat Mar 11, 2006 5:14 pm

Katie&Craig,

It seems you want it all. Low cost, extreme durability, low/no maintenance. I don't think it works that way, or we would all (most of us) would do it. I'm thinking truck bed liner in one of the lighter colors, the off road jeep guys use it. It might hold up to your "occasional large woody shrub." But is isn't cheap as house paint. Just my thoughts.



Steve
Steve
User avatar
Steve_Cox
4000 Club
4000 Club
 
Posts: 4903
Images: 196
Joined: Sun Apr 03, 2005 8:46 am
Location: Albuquerque New Mexico

Postby cracker39 » Sat Mar 11, 2006 5:25 pm

You probably won't like mine, because it will be white. But, I don't think it will be confused with any big RV. I'm going to spray my plywood with a couple of coats of Helmsman Polyeurothane Spar Varnish and sand after each coat, just to seal the wood. Then, one coat of primer/filler and sand, then one or two coats of a good exterior white, latex, semi-gloss enamel. I'll checkwith paint sales to see if a primer is really necessary over the varnish.

I am choosing latex over oil-based because it resists sunlight, moinsture, and tempeature changes better than oil-based enamel. I may put a clear coat over it, but am using semi-gloss because it hides imperfections better than gloss, and I am sure no matter how much prep I do, there will be imperfections. I have sprayed a lot of latex enamel with my pressurized paint guns. I usually thin with 10%-15% water before spraying. It dries quickly and if I am careful, there are no runs or sags.
Dale

Sometimes I pretend to be normal. But, that gets boring...so I go back to being me.

Squidget Pop Top Build Pages http://www.thesquidget.com/ptbuild/ptbuild.html

Squidget and Pop Top Plans Info and Photos: http://www.TheSquidget.com
User avatar
cracker39
3000 Club
3000 Club
 
Posts: 3069
Images: 233
Joined: Thu Jun 30, 2005 2:18 pm
Location: Lake Alfred, Florida, USA
Top

Postby bdosborn » Sat Mar 11, 2006 6:15 pm

FRP (Fiberglass Reinforced Plastic) has all the qualities you want except its usually white. Make sure you get the kind the kind that has UV stabilizers in it. It can be painted any color you want. There's a reason most RVs are white, the dark ones get HOT. $1.75/SF is a good price for FRP. There's a thread around here somewhere about it.

http://www.themetalcompany.com/Products ... /index.htm

Bruce
2009 6.5'X11' TTT - Boxcar
All it takes is a speck of faith and a few kilowatts of sweat and grace.
Image
Boxcar Build
aVANger Build
User avatar
bdosborn
Donating Member
 
Posts: 5492
Images: 767
Joined: Wed May 05, 2004 11:10 pm
Location: CO, Littleton
Top

Postby Mitheral » Sat Mar 11, 2006 6:46 pm

If I end up building a ultralight I'll be coating the exterior ply with polyester resin with glass reinforcement in the corners then painting with a couple coats of house paint. Available any colour you'd like though lighter shades are cooler and darker shades will fade faster/more.

Not super tough but cheap and easy to repair.

That's if I don't use chrome bumper paint for the whole thing.
Mitheral
Teardrop Master
 
Posts: 179
Images: 19
Joined: Mon Sep 05, 2005 12:05 pm
Location: Canada
Top

Postby cracker39 » Sat Mar 11, 2006 6:58 pm

I don't think Rustbullet would stick well to wood, but it sure would look good. 8)
Dale

Sometimes I pretend to be normal. But, that gets boring...so I go back to being me.

Squidget Pop Top Build Pages http://www.thesquidget.com/ptbuild/ptbuild.html

Squidget and Pop Top Plans Info and Photos: http://www.TheSquidget.com
User avatar
cracker39
3000 Club
3000 Club
 
Posts: 3069
Images: 233
Joined: Thu Jun 30, 2005 2:18 pm
Location: Lake Alfred, Florida, USA
Top

Postby cracker39 » Sat Mar 11, 2006 6:58 pm

But, I already have my RV door and it's white...darn.
Dale

Sometimes I pretend to be normal. But, that gets boring...so I go back to being me.

Squidget Pop Top Build Pages http://www.thesquidget.com/ptbuild/ptbuild.html

Squidget and Pop Top Plans Info and Photos: http://www.TheSquidget.com
User avatar
cracker39
3000 Club
3000 Club
 
Posts: 3069
Images: 233
Joined: Thu Jun 30, 2005 2:18 pm
Location: Lake Alfred, Florida, USA
Top

Postby angib » Sat Mar 11, 2006 7:25 pm

Plywood and house paint. Cheap and, with the money saved, promise to buy a tin of Bondo to repair the dings - and then get to like them un-repaired, describing it as the 'lived-in look' to others.....

Andrew :D
User avatar
angib
5000 Club
5000 Club
 
Posts: 5783
Images: 231
Joined: Fri Apr 30, 2004 2:04 pm
Location: (Olde) England
Top

Postby cracker39 » Sat Mar 11, 2006 9:16 pm

I already have the Bondo!!! :thumbsup:
Dale

Sometimes I pretend to be normal. But, that gets boring...so I go back to being me.

Squidget Pop Top Build Pages http://www.thesquidget.com/ptbuild/ptbuild.html

Squidget and Pop Top Plans Info and Photos: http://www.TheSquidget.com
User avatar
cracker39
3000 Club
3000 Club
 
Posts: 3069
Images: 233
Joined: Thu Jun 30, 2005 2:18 pm
Location: Lake Alfred, Florida, USA
Top

Postby bdosborn » Sat Mar 11, 2006 10:47 pm

Hmmm, methinks this topic would be a good poll....
Bruce
2009 6.5'X11' TTT - Boxcar
All it takes is a speck of faith and a few kilowatts of sweat and grace.
Image
Boxcar Build
aVANger Build
User avatar
bdosborn
Donating Member
 
Posts: 5492
Images: 767
Joined: Wed May 05, 2004 11:10 pm
Location: CO, Littleton
Top

Postby mikeschn » Sun Mar 12, 2006 3:45 pm

bdosborn wrote:Hmmm, methinks this topic would be a good poll....
Bruce


Me too, so which admin is going to turn this into a poll?

Mike...
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
User avatar
mikeschn
Site Admin
 
Posts: 19202
Images: 479
Joined: Tue Apr 13, 2004 11:01 am
Location: MI
Top

Postby Gerdo » Sun Mar 12, 2006 6:04 pm

I went with FRP "Filon". I love the look of the silver aluminum, BUT with all the hail that we get in Colorado I felt that aluminum was not an option.
User avatar
Gerdo
1000 Club
1000 Club
 
Posts: 1361
Images: 156
Joined: Mon Apr 25, 2005 12:02 am
Location: Littleton, Colorado
Top

Postby Kevin A » Sun Mar 12, 2006 6:15 pm

mikeschn wrote:
bdosborn wrote:Hmmm, methinks this topic would be a good poll....
Bruce


Me too, so which admin is going to turn this into a poll?

Mike...


Here ya go. ;) http://tnttt.com/viewtopic.php?t=3119
"Follow me, I'm right behind you"

ImageImage
User avatar
Kevin A
The other guy
 
Posts: 3222
Images: 289
Joined: Mon Jan 17, 2005 1:16 am
Location: California, Eureka
Top

Re: What is the best exterior covering?

Postby Ira » Mon Mar 13, 2006 8:46 am

Katie&Craig wrote:
Reasonably low cost:
Low cost is good since otherwise we can’t afford it. Also, something that can be inexpensively and easily replaced if the exterior starts to get too worn would be good.


I doubt you would want something that you would need to replace, other than repainting.

But check out Rot Doctor's Uniflex. It's amazingy durable stuff, and although it'll cost you about $100 to do your tear (I think), that's a drop in the bucket when you consider you can apply it directly to your ply walls.
Here we go again!
User avatar
Ira
Forum Storyteller
 
Posts: 5652
Images: 118
Joined: Tue Nov 29, 2005 2:16 pm
Location: South Florida
Top

Postby EZ » Mon Mar 13, 2006 11:12 am

I too am planning on using latex paint. It sounds like some folks seal the wood with polyurethane and sand before painting with primer. Is this mostly to get rid of the grain or make it cover beter or maybe both? Maybe water-based varnish would work too especially since it is covered with a few coats of paint. Would still seal the wood well.

Ed
User avatar
EZ
Donating Member
 
Posts: 427
Images: 72
Joined: Sun Jan 15, 2006 12:32 am
Location: Circle Pines, Minnesota
Top

Next

Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: No registered users and 17 guests