I've been advised to place my wiring in conduit.
I'm trying to figure out where and how to place all my electrical and I'd like to hear how and where others have placed it.
I don't see a problem going vertical with the conduit in the walls, it will just mean very little insulation if any where the conduit is.
I do see a problem running conduit horizontally in my walls because of the limited thickness of my stud wall. A hole in my stud for the conduit will just about wipe out the stud. (My inner portion of my walls will only be 1" thick)
I wonder if using a metal plate over both sides of the stud where the conduit hole is going to be located will be sufficiant to keep the integrity of the stud?
I can see placing the conduit in the frame rails, but I'm unsure how to make such a sharp transistion to switch from horizontal to vertical. All the conduit I've seen in construction have nice sweeping radius bends when making a 90 degree turn. (I think the tool that bends that is called a hickey)
I've also seen where a junction box is used to make transition.
I'd sure like to see some other examples from folks more in tune with the electrical situation...