removable galley

General Discussion about almost anything Teardrop or camping related

removable galley

Postby surveytech » Sun Aug 20, 2006 4:02 pm

Here is a couple of pics of a removeable galley.
Hope this spawns some ideas for all the new builders.

Galley in.......
Image

Galley out.........
Image

The countertop, upper pantry and front interior shelf rest on some 2 x 2's that are screwed to each wall.

The lower bulkhead is held in place with four window sash locks.

All comes out in about 2 minutes with no tools.
Needed to have cargo configuration to be able to haul "stuff".
(never have enough stuff)

Hope this helps someone.

Walter
surveytech
Donating Member
 
Posts: 776
Images: 6
Joined: Fri Apr 29, 2005 7:13 pm
Location: kissimmee, florida

Postby Melvin » Sun Aug 20, 2006 4:16 pm

Looks good.
Commandant Louis Joseph Lahure has a singular distinction in military history - he defeated a navy on horseback. Occupying Holland in January 1795, the French continental army learned that the mighty Dutch navy had been frozen into the ice around Texel Island. So Lahure and 128 men simply rode up to it and demanded surrender. No shots were fired.
Melvin
Teardrop Master
 
Posts: 220
Images: 14
Joined: Sat Apr 08, 2006 3:04 pm
Location: Kamloops BC Canada

Postby kirtsjc » Sun Aug 20, 2006 5:23 pm

Thanks for the pics on the removable gallery!

BTW, what supports did you use for the hatch? For the life of me, I can't remember what type those are called...
User avatar
kirtsjc
Silver Donating Member
 
Posts: 324
Images: 43
Joined: Sat Jan 07, 2006 8:56 am
Location: Cincinnati, Ohio
Top

Postby Gage » Sun Aug 20, 2006 7:12 pm

Aw, my idea of a few years back has been followed. My galley not only slides in and out but is also removeable. Need to remove galley and lower bulkhead so as to remove mattress. Yep, it takes about 2 minutes.

Have a good day.

:thinking:
Image Image Image
Remember 'Teardrop Time'.......Take your time, you don't have to have it finished NOW.
User avatar
Gage
8000 Club
8000 Club
 
Posts: 8321
Images: 28
Joined: Sat Apr 17, 2004 9:14 pm
Location: Palmdale, CA
Top

Postby surveytech » Mon Aug 21, 2006 9:25 am

kirtsjc wrote:Thanks for the pics on the removable gallery!

BTW, what supports did you use for the hatch? For the life of me, I can't remember what type those are called...


Those are hatch props from Austin Hardware, cheap and strong.
surveytech
Donating Member
 
Posts: 776
Images: 6
Joined: Fri Apr 29, 2005 7:13 pm
Location: kissimmee, florida
Top


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 0 guests