electrical system

Anything electric, AC or DC

electrical system

Postby robm7 » Sat Jul 09, 2005 2:04 am

hi all.
So i have my walls framed and I am looking to run the wires etc for the electrical system
are there any schematics or diagrams or anything available, how do I go about wiring a 12/120 volt system. unfortunately this is the part of the build where I am completely lost
thanks rob
Teardrop Inspector
Posts: 7
Images: 7
Joined: Tue Jun 07, 2005 2:06 am

Postby DestinDave » Sat Jul 09, 2005 4:52 am

Read through the sticky above (My Wiring Plans) where Joanne has posted several schematics and others have posted or modified as well. A LOT of good info in that thread.
Reality? What a concept!
Building "The Salty Tear" - a photo log of the project.
User avatar
500 Club
Posts: 687
Images: 4
Joined: Sat Jan 29, 2005 10:03 am
Location: Hendersonville, NC

12 V DC Help

Postby Dee Bee » Mon Jul 11, 2005 8:45 pm

If it helps take a look at what I did. It is just one example. There are a lot of good electrical set ups on this forum.


I recommend this link as required reading


Read about the gague of wire and its capacity to carry DC loads. This is important for a safe DC system.

Finally, this is how I put an AC and DC system together...


Grace happens...
User avatar
Dee Bee
500 Club
Posts: 696
Images: 55
Joined: Fri Jun 04, 2004 9:17 pm
Location: York, PA

Return to Electrical Secrets

Who is online

Users browsing this forum: No registered users and 3 guests