by Homebrewer25 » Wed Jun 06, 2018 8:33 pm
I have that trailer and am waiting for the machine shop to make my tongue extension. Like so many others here have done, it is a 2x2 square steel tube 7 1/2 ft long. I'm inverting the top coupler mounting plate of the trailer and sliding the 2x2 thru it, bolting to 1st and 2nd crossmembers. A 2.5 square tube 8" long is being welded on the top of the coupler end for the existing coupler to mount to with new grade 8 bolts/nuts. In addition to reinforcing the tongue, it adds about 32" length to the tongue, making it easier to back the trailer.