You might want to re-think that tailgate, though. Having to reach over that to get to either the cookstove or the sink is not going to be much fun. It might be possible to arrange it so that it hangs straight down, and that would solve that problem ... ...
grant whipp wrote:This design kind of inspird me, so I messed around with it a bit, just for Ss&Gs ... how about something like this:
I'm a big fan of light & ventalation, so I penciled in a 12x18 crank-out window in the door and a 15x24 in the sidewall (and maybe consider a 15x40 in the off-door side). And, I'm with Kerry with regards to making the tailgate part of the hatch.
Something else to consider, maybe, would be puting the spare on the roof as already suggested, but put a dropped footwell where you have the spare, now (but more toward the rear, closer to the axle), about half the depth as the tire is wide. You could even put a 45º on angle the front of the footwell to make it look and act as a skid-plate ...
CHEERS!
Grant
Users browsing this forum: No registered users and 0 guests