by doug hodder » Sat Jan 17, 2009 2:32 am
I was thinking Jeremy...I've got a chunk of 1/8" alum. plate that I can make an outer rim on to support the waffle iron, leave the entire center open, just some locking studs for the existing grate so it won't move and some some vertical studs to corral the iron base. Drill and tap holes for the studs and use 10/24 screws. It should be removed enough from the direct flame so as to not cause any heat issues on the ring. I figure it will all be removable from the existing base for storage, lift off. Gotta work on that one...maybe Sun AM...I'll burn a waffle for grins! Doug