New name for the curved weekender

Threads about the forum, forum software, forum features, etc

Postby mikeschn » Sun Sep 12, 2004 6:23 pm

Hey Arne,

Yes, with 54" you have a lot of comfort already built in... adding a dropped floor will only add to your level of comfort...

BTW, let me know when you join the 2nd teardrop club... we still have a few openings, but only a few... :wink: :rofl:

Mike...
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
User avatar
mikeschn
Site Admin
 
Posts: 19202
Images: 475
Joined: Tue Apr 13, 2004 11:01 am
Location: MI

Postby Laredo » Mon Sep 13, 2004 3:03 pm

If you were going to make the Weekender taller, would it be easier to extend the flat front section ... and the sides and hatch ...

or would it be easier to build a 3' tall inside section and then overlap that with a 2' deep "outside section" that raised 6'' or 8''(on scissor lifts, etc) when you stopped, opened a couple of latches, and turned a crank a few times?

Seems to me that if you shorten and narrow the dimensions of the lower 'half' by 3/16'' and then lengthen and widen the dimensions of the 'upper' half by another 3/16'' you should have clearance to do this, and you could weatherstrip the gap(s) to keep out drafts and bugs.
Yes, no, maybe? Is a grand total of 3/8'' enough "slip tolerance" for this to work?

It might be possible, depending on how good an engineer you are, to make it so that you didn't HAVE to raise the roof to use the bed, but could do so in a short, easy maneuver if you wanted extra interior height.
Mopar's what my busted knuckles bleed, working on my 318s...
User avatar
Laredo
Donating Member
 
Posts: 2017
Images: 0
Joined: Mon Jul 05, 2004 10:42 pm
Location: West Texas

Postby mikeschn » Mon Sep 13, 2004 3:23 pm

It looks like you want to gain an extra 6 to 8 inches of headroom. I would not build a fancy mechanism for that. I would just add the extra height onto the side panels, and then build as normal.

If you are building an insulated version of the weekender, it's easy to add the height. An insider furring strip with the plywood joint meeting in the middle of the furring strip.

That's exactly what I'll be doing on the Lil' Diner!!!

Mike...
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
User avatar
mikeschn
Site Admin
 
Posts: 19202
Images: 475
Joined: Tue Apr 13, 2004 11:01 am
Location: MI
Top

Postby Arne » Mon Sep 13, 2004 4:05 pm

On thing that has been a bugaboo for me is furring strips are not the 3/4" thick I thought they were... I was mixing furring strips with 3/4" and had to do some 'finessing' to get it to work....

New photo in my album "ready to panel".......
www.freewebs.com/aero-1
---
.
I hope I never get too old to play (Arne, Sept 11, 2010)
.
User avatar
Arne
Mr. Subject Line
 
Posts: 5383
Images: 96
Joined: Fri Aug 13, 2004 12:25 pm
Location: Middletown, CT
Top

Postby Steve Frederick » Mon Sep 13, 2004 6:07 pm

Now if I could find a local woodworker who would do some building for me, I could have my cake and eat it too...

I'm not local, but, the garage is empty! :twisted: I think I could do a nice documentary too! :wink:
Blessings, Steve
Adirondacks, Upstate New York
Building Journals
The Shop Manual's 8-years old!! Thank's everyone!
New! 'Rondack Lodge Plans!Order Here!
Image
User avatar
Steve Frederick
Custom Teardrop Builder
 
Posts: 1984
Images: 29
Joined: Thu Apr 15, 2004 5:02 pm
Location: Upstate New York, Adirondacks (Great Sacandaga Lake)
Top

Postby mikeschn » Mon Sep 13, 2004 6:14 pm

Hey Steve,

Sounds like you are game to play with another project... Let me pose this question to you...

If you could build a teardrop that many people on this board would like to do, what would it be?

I've already done the "build it fast" with the Squared Weekender
We've toyed around with "cheap" and we know we are in the $800 to $1000 range.
Fancy... your cedar stripped tear is a really tough act to beat.
As for teardrops with tables, I've got the Lil Diner in the works...
so what the next niche that'll have us all hitting your webpage every night to see what we'll be building???
Remember, put yourself in the average woodworkers shoes...
:lol:

Mike...
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
User avatar
mikeschn
Site Admin
 
Posts: 19202
Images: 475
Joined: Tue Apr 13, 2004 11:01 am
Location: MI
Top

Postby Steve Frederick » Mon Sep 13, 2004 7:12 pm

Remember, put yourself in the average woodworkers shoes...

Well, No one here is average :wink: or, we wouldn't love Tiny Trailers :D
As for a project, I have a Snow bear utility trailer, as does my best friend, Ron....So, some kind of POD to slide into the trailer. I was thinking about a version of the weekender. Now that you pose the posibilities of the "round-ender" or "slide-ender" (does that sound like a name entry??), I can't decide.
I would try to construct it with tool use limited to portable's. No fancy joinery, or techniques..Strictly lo-tech!
I don't need another Teardrop, so, if I can't get Ron interested, I don't know.
I run into this problem all the time, My desire to create things surpasses the ability to sell or use them myself.
My wife "needs" a new boat. So, that will be one project. But, I love multi-tasking! :twisted:
Blessings, Steve
Adirondacks, Upstate New York
Building Journals
The Shop Manual's 8-years old!! Thank's everyone!
New! 'Rondack Lodge Plans!Order Here!
Image
User avatar
Steve Frederick
Custom Teardrop Builder
 
Posts: 1984
Images: 29
Joined: Thu Apr 15, 2004 5:02 pm
Location: Upstate New York, Adirondacks (Great Sacandaga Lake)
Top

Postby Steve Frederick » Mon Sep 13, 2004 7:53 pm

I was bored, reviewed some old threads.....The Winter Warrior??? HMMM :idea:
Blessings, Steve
Adirondacks, Upstate New York
Building Journals
The Shop Manual's 8-years old!! Thank's everyone!
New! 'Rondack Lodge Plans!Order Here!
Image
User avatar
Steve Frederick
Custom Teardrop Builder
 
Posts: 1984
Images: 29
Joined: Thu Apr 15, 2004 5:02 pm
Location: Upstate New York, Adirondacks (Great Sacandaga Lake)
Top

Postby mikeschn » Mon Sep 13, 2004 7:58 pm

Well if you did the Winter Warrior, you'd certainly be the envy of a lot of folks here. That's going to be one beautiful hardsided tiny travel trailer. Don't tell Michelle, that it's on my todo list!!! LOL

Let me know what you decide... I can update the plans for you.

Mike...

P.S. Did you get my email on the Lil Diner?
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
User avatar
mikeschn
Site Admin
 
Posts: 19202
Images: 475
Joined: Tue Apr 13, 2004 11:01 am
Location: MI
Top

Postby Steve Frederick » Mon Sep 13, 2004 8:15 pm

P.S. Did you get my email on the Lil Diner?

Reply in "mail" Thanx!
Blessings, Steve
Adirondacks, Upstate New York
Building Journals
The Shop Manual's 8-years old!! Thank's everyone!
New! 'Rondack Lodge Plans!Order Here!
Image
User avatar
Steve Frederick
Custom Teardrop Builder
 
Posts: 1984
Images: 29
Joined: Thu Apr 15, 2004 5:02 pm
Location: Upstate New York, Adirondacks (Great Sacandaga Lake)
Top

Postby Larry Messaros » Mon Sep 13, 2004 8:35 pm

How about the "AquaTear" from DANL.

I went back to look for some pics but he took it off his website.
Larry Messaros
:snow
Cariboo Country: If you don't like the weather, wait 5 minutes!
User avatar
Larry Messaros
Platinum Donating Member
 
Posts: 392
Images: 8
Joined: Fri Apr 16, 2004 12:42 am
Location: 70 Mile House, BC
Top

Postby mikeschn » Mon Sep 13, 2004 8:37 pm

Wouldn't that be a hoot!!! A cedar striped Aquatear...

Whoh!!!! LOL

Mike...
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
User avatar
mikeschn
Site Admin
 
Posts: 19202
Images: 475
Joined: Tue Apr 13, 2004 11:01 am
Location: MI
Top

Postby beverlyt » Mon Sep 13, 2004 8:51 pm

Mike,
From Bob:

How about:
M&M's Peanut.

Bev
User avatar
beverlyt
500 Club
 
Posts: 955
Images: 20
Joined: Sat Apr 17, 2004 4:50 am
Location: Grand Haven, Michigan
Top

Postby nater104 » Mon Sep 13, 2004 10:16 pm

How about "The Many Weekender" ?

"The Many Weekendser" sounds kinda neat too :)
Nathan -~- In the Lehigh Valley, PA
1966 15' Scotty Gaucho
1973 Apache Ramada
2008 Jayco 19H
User avatar
nater104
Teardrop Master
 
Posts: 137
Images: 13
Joined: Thu Sep 09, 2004 9:08 am
Location: Bethlehem, PA
Top

Postby Guest » Tue Sep 14, 2004 12:02 am

I'm suprised that no one has noticed the teardrop of the future. It's hovering right in Mike's avatar. Self propelled, no wheels... the "Hover Tear" right out of the pages of a George Jetson episode. :D

(Now don't go changing your avatar, at least for a couple of days...OK Mike?)
Guest
 
Top

PreviousNext

Return to Threads about the forum!

Who is online

Users browsing this forum: No registered users and 0 guests